nowhres

Do it

jimmy21669

Show me...I have tried

I want 1.5" in and out with an m22x1.5 port....

Pudgy Fingers

I called Saab and he had no idea what I was talking about. He was supposed to fax me a diagram. Does this mean I can stop looking?

MD_XJ_MD

How am I supposed to measure these bushings for my sway bar? Measure the bar itself or..

jacobb89

So after doing muffler headers injector swap and all cleaning intake and so on i picked up like 1 mpg getting 11.2-11.5. Still think somethings up i know its gotta go through the 50 warm up cycles. But most people I see with around the same lift and tires wise and all are getting like 15-16 im lost lol.
any tips on what to look at?

dukie564

yea measure the bar. I used calipers but you could use an adjustable wrench also

jimmy21669

Yeah...thanks....

Response from Dirtbound:

"The T started as a 1/2" NPT, so any 1/2" NPT fitting from the hardware store will work. We then machine the one port and re tap it to M22x1.5.
I can sell just the T for $15 plus $5 shipping.
Max Wilson

DirtBound Offroad
Lead Product Designer
O: (909) 599-4847
www.DirtBoundUSA.com "

jacobb89

measure the bar with micrometer

a_shirey

painting my new LCAs. And now its pouring down rain.

Pudgy Fingers

I'm getting 15-16.5 on 5.5" and 32s. 3.55 gears. Mostly highway for me though.

jacobb89

i do a mix i got 4.5 on 32s not sure what im gearing is though

MD_XJ_MD

Don't have an adjustable large enough nor do I have a micrometer

jacobb89

advanced auto has em for like a few bucks i got some from there when i did mine they were 48 cent lol

abe froman

wrap string around it. and mark w/ a pen/sharpie, whatever. measure from the end of the string to the mark you made on the string to get circumference. divide by pi (3.14159) and that gets you diameter.

Pudgy Fingers

There might be a tag on the diff cover. Clean off and it will tell you or request a build sheet online.