Maryland Cherokee Club
#6348
CF Veteran
Join Date: Nov 2010
Location: glen burnie md
Posts: 5,151
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
jakbob!! how about skids for 2000? i may need a drivers seat-n-track if this deal on a new (to me) goes down?
Last edited by gone4x4; 01-27-2012 at 05:42 AM.
#6349
CF Veteran
Join Date: Dec 2010
Location: Frederick, Maryland
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
I'd estimate that's about right - it's the furthest thing back, so literally everything has to come out.
Here - photos are dead at the moment but here's the procedure:
http://www.jeepforum.com/forum/f11/m...thread-592844/
Here - photos are dead at the moment but here's the procedure:
http://www.jeepforum.com/forum/f11/m...thread-592844/
I've definitely seen saws at cr however I think they are frowned upon. F'em.
#6350
CF Veteran
Join Date: Dec 2011
Location: Pasadena, MD
Posts: 4,006
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
Hawkins point. Round 9-10 am I think?
Sure, but if I only find one skid, it has to go to brian0128, he asked first. But ill be on the lookout
Tentative plan is yes, but the last couple of days haven't happened the way I wanted too... lol
If you could make it to Frederick on Sunday that would be awesome! Clown is missing. He usually helps me with stuff.
Good god. Haynes didn't make it seem that bad. Thanks for the link. It's very detailed! In a good way.
I've definitely seen saws at cr however I think they are frowned upon. F'em.
Good god. Haynes didn't make it seem that bad. Thanks for the link. It's very detailed! In a good way.
I've definitely seen saws at cr however I think they are frowned upon. F'em.
#6351
CF Veteran
Join Date: Dec 2010
Location: Frederick, Maryland
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
#6354
CF Veteran
Join Date: Jan 2012
Location: Baltimore, MD
Posts: 8,272
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
Originally Posted by jakbob
Gears... gears... GEARS!
I was talking to classic. What do you need help with besides the mpg thing?
#6355
Member
Join Date: Jun 2010
Location: Frederick, MD/ Trion, Ga
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Just called the auto shop on Detrick. They do have a press, and they do have air tools. No, we aren't allowed to drink while working with their equipment
They don't have any alignment equipment, but a tape alignment should be good enough to get me to a shop (if I need it done professionally).
I have: Coil springs, leaf springs, shocks, and tie rod. I also have a TC drop in case I need it.
Dukie, yesterday I bought the preemptive stuff you told me to get. 10 bolts, 8 nuts, and 12 washers, I think. It was more than you told me to get cause they're in packs, and the bolts and nuts are Grade 5. I also got those dust boots in the mail, and I put em on the TR so I don't lose em.
If people who plan to help on the 1st can PM me and guesstimate the times you'll be available, I'd appreciate it. Also let me know what (non-alcoholic) drinks you want while we're working. Shop opens at 9, and I plan to be there at 8:30 to make sure I get a lift.
They don't have any alignment equipment, but a tape alignment should be good enough to get me to a shop (if I need it done professionally).
I have: Coil springs, leaf springs, shocks, and tie rod. I also have a TC drop in case I need it.
Dukie, yesterday I bought the preemptive stuff you told me to get. 10 bolts, 8 nuts, and 12 washers, I think. It was more than you told me to get cause they're in packs, and the bolts and nuts are Grade 5. I also got those dust boots in the mail, and I put em on the TR so I don't lose em.
If people who plan to help on the 1st can PM me and guesstimate the times you'll be available, I'd appreciate it. Also let me know what (non-alcoholic) drinks you want while we're working. Shop opens at 9, and I plan to be there at 8:30 to make sure I get a lift.
I would be there, but like i said i am on that wed/thurs.
I have never done that before, but it would be good to know. You talking about doing it this weekend? I am working this one but not the next...willing to help all i can..
#6356
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
He means the 33s won't hurt you if you regear to match them.
Thanks for the info. I haven't been in the shop yet; I've only talked to them over the phone, and I used the wash bay once.
I just finished the 96 there wed. When you get there aim to get that back right bay. It has the most room and is right beside the torch and welding area, lol... I used it A Lot... and they don't start bothering you about clean up till bout 30 mins before.
I would be there, but like i said i am on that wed/thurs.
I would be there, but like i said i am on that wed/thurs.
#6359
CF Veteran
Join Date: Jan 2012
Location: Baltimore, MD
Posts: 8,272
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0 I6 HO
Originally Posted by jakbob
this is what i picture with gearing;
31's - 4.11
33's - 4.56
35's - 4.88
that sound about right guys?
#6360
☠ CF Sheriff ☠
yes