Veeb0rg

Yup got a set with good tread ya can borrow.

gone4x4

if Veeborgs are already off the rig,thats the way to go,as soon as i get my project racked, i'll have a passable set also, as a back-up or whatever

brian0128

Supposed to be 60 degrees today.

gone4x4

i know right?--shouldnt be at werk--should be fishin---

XJnewbiegirl

really? awesome! ill PM you.

NewKindOfClown

I was gonna offer, but he's a lot closer. Good luck with inspection

dukie564

love me some Airplane!

dukie564

yea that's the breather for the rear differential - hope you didn't get water in there. I'd double check/change the fluid asap - water will destroy gears really quick

then do what I did with the rear vent
https://www.cherokeeforum.com/f2/how...ff-vent-67922/

brian0128

I was bored and drove onto the scales at work today. 3582 lbs.

NewKindOfClown

Dukie, how does this method of hockey pucks hold up? They use silicone on the axle side instead of bolting in the coil. http://jeep-xj.info/HowtoBumpstops.htm
Also, are those swaybar links finished? I haven't asked in a while lol

dukie564

when we did Brian's we drilled a hole and bolted them down - it was really easy. I'd personally feel more comfortable if mine were installed this way vs silicone

and i'll be finishing the disconnects up tomorrow using the shop's equipment - need to bend the top brackets up and drill a few holes. Not having a bench vice made it very difficult at home lol.

NewKindOfClown

Lol I can imagine. My priority today is waiting for my track bar, and FedEx is taking their time. Once I get that, I'm heading out for hockey pucks and to get my last tire dismounted so I can take the wheels home. I have a lot to do today, and my mind is totally blank..it's kinda frustrating cause I can't remember anything on my list, and I didn't write it down. Anyway, I'm gonna pick up a bag of 12 pucks if I can find one, and I'm gonna wait on the bolts til I know what length I need.

dukie564

just get 4/4.5" ones - i wouldn't run more than 3 pucks anyways and you shouldn't need to

XJnewbiegirl

i need them sometime this week, so if he doesnt get back to me i will PM you as well. thanks for the offer

NewKindOfClown

Wouldn't 3 pucks require a 3.5" bolt?
That's what I read here, anyway: http://greatlakesxj.activeboard.com/...ont-bumpstops/