Maryland Cherokee Club
03-12-2013, 07:27 PM
CF Veteran
03-12-2013, 07:48 PM
Seasoned Member
Join Date: Mar 2012
Location: Glen Burnie, MD
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
03-12-2013, 07:50 PM
CF Veteran
Join Date: Dec 2010
Location: Frederick, Maryland
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 I-6 High output
03-12-2013, 07:51 PM
CF Veteran
Join Date: Feb 2012
Location: Laurel, MD
Posts: 2,574
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
03-12-2013, 07:54 PM
Seasoned Member
Join Date: Apr 2012
Location: Glen Burnie Maryland
Posts: 481
Likes: 0
Received 6 Likes
on
3 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 6l
ill try have you ever taken off the stock fender flares? the other side of the bolts that hold that on hold a rubber inner fender that is held there aswll and with out the three fender bolts its kinda flappy
03-12-2013, 07:56 PM
CF Veteran
Join Date: Mar 2009
Location: Berea, OH
Posts: 7,996
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Remove the flares, remove the inner fender liner....that simple
03-12-2013, 07:58 PM
Seasoned Member
Join Date: Apr 2012
Location: Glen Burnie Maryland
Posts: 481
Likes: 0
Received 6 Likes
on
3 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 6l
03-12-2013, 07:59 PM
Seasoned Member
Join Date: Mar 2012
Location: Glen Burnie, MD
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Yes leave that inner fender. It does provide some protection to the engine area. Just put zip ties thru the bolt holes to fasten it in. If your missing those plastic rivits then just go buy a pack at the auto parts store. I make a point to keep some handy so im not worried about opening stuff up.
03-12-2013, 08:01 PM
Seasoned Member
Join Date: Apr 2012
Location: Glen Burnie Maryland
Posts: 481
Likes: 0
Received 6 Likes
on
3 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 6l
Yes leave that inner fender. It does provide some protection to the engine area. Just put zip ties thru the bolt holes to fasten it in. If your missing those plastic rivits then just go buy a pack at the auto parts store. I make a point to keep some handy so im not worried about opening stuff up.