Hey BNjeepsta what all do u have to wheel on. Im in Greenville not too far and were thinking about going to Leeper this summer fir a week.

 

Some gravel pits and tons of trails and logging roads. Plus some of the best scenic drives the area has to offer. If ya make it up my way sometime give me a shout. I'm always willing to wheel with some new ppl

 

work

 

Picked up a tc skid at the local yard today, gonna go smash it up tomorrow

 

you ready 2 break stuff?

 

Maybe some of you local guys will get some use out of this.

Free parts if anybody wants them. Local pickup only in Allentown, Pa 18103.

Tan spare tire cover off of a '94 Xj.

Brand new d35 u bolts

4" lift/lowering blocks. Came off an s10

Stock Xj rear swaybar

Stock Xj track bar and bracket. Bad bushing and tre by bar is solid aswell as bracket

Used rotors and drums d30 & 8.25 have been sitting in my scrap pile outside but are still useable.

Stock Xj headlights. Bought them new and only ran them for less than a year before upgrading. Good as spares

A/c parts off of '94. Have most parts from the firewall forward with the exception of the condenser.

Almost free parts:



$10 parts:

Stock replacement tail pipe off of '94 Xj. Less than 1k miles

Used flowmaster muffler



$5 parts:

Lower dash piece under steering column with metal support. Grey in color. Fits '97-'01. Bought it at the junkyard thinking a buddy needed it but I was wrong. Just want my $5 back.

Rear wiper switch out of '94 Xj

Two Xj headlight switches



Other parts for sale:

Stock engine skid. $50

Stock '97+ tail lights $50




Need other parts? Ask... I might have them. Please PM with any questions/comments/inquiries to keep thread clean.


When I say local pickup only, I mean it. I will ship or meet for select items, but you will pay for my time, resources, and fuel.

 

I hope not! I'm ok with body damage though

 

wow!!! i just swapped in neon 784's and its the best mod ive done, my #4 injector was so bad it was causing my jeep 2 smoke... thought it was a head gasket, this is the best my jeep has ever run!

 

Put in my WJ front seats.

 

Did the complete cut. Now who gave me that idea? Still have to weld the 3/16 bar along edge to tie both panels in. And new intake installed.

 

Stupid phone ( ie operator) here's the pics.

 

Well I cleaned the Jeep and there us still mud everywhere

 

So it turns out you actually don't need 4x4 to go wheelin in an XJ.

 

definitely still got a bad gasket at least, that bad boy was smokin me out all day

 

Let's hope it's just a head gasket and not a ring or grooved wall.