1988 Redneck Ride
03-31-2012, 06:48 PM
#211
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Arizona
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Ok I'm trying to post some pictures of my tent from my cellphone. I hope it works.
I got the tent a few weeks ago and i got say its AWESOME! It took about 5 minutes to set it up. Very well made. Can't wait to get it mounted to the trailer. I'm really wanting to get started on the trailer now. Going to have to buy a welder i think. Take it easy out there.
I got the tent a few weeks ago and i got say its AWESOME! It took about 5 minutes to set it up. Very well made. Can't wait to get it mounted to the trailer. I'm really wanting to get started on the trailer now. Going to have to buy a welder i think. Take it easy out there.
04-17-2012, 07:56 AM
#214
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Arizona
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Well for an update. Finally desided to do the head gasket. It was bad. 3 cylinders had coolant in them. So Im having a valve job done, milling the head, and a over all clean up of the head and intake manifold. With that Im also replaceing the fly wheel, New exuast header, Throotle body spacer, and A/C system. I hope I can get it all back together. 
. I will try to post some pictures and do a write up also.
. I will try to post some pictures and do a write up also.
05-02-2012, 02:52 AM
#215
Newbie
Join Date: Apr 2012
Location: Louisiana
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0l
Hey man. I just read you're entire suspension thread and build thread. I gotta say, absolutely impressive. Im 18, I've always loved jeeps. I bought my first one three weeks ago, already kinda set up, small lift, roof rack, tires, and bumpers. But, a week after I bought my 93 the clutch went out, along with the rearend, and many many many minor problems.
ha. So I'm selling that junker. Hopin to get a new soon. But your thread is going to be my go to source for my new xj. Great build. 
ha. So I'm selling that junker. Hopin to get a new soon. But your thread is going to be my go to source for my new xj. Great build.
05-07-2012, 09:47 PM
#216
Member
Join Date: Oct 2011
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Just spent some time reading this thread.
First thing to say is "SWEET JEEP!"
Second thing to say is "REALLY SWEET JEEP!!"
Third thing is "where did you get that antenna mount?" I'm really diggin it.
First thing to say is "SWEET JEEP!"
Second thing to say is "REALLY SWEET JEEP!!"
Third thing is "where did you get that antenna mount?" I'm really diggin it.
05-08-2012, 01:27 AM
#218
Member
Join Date: Mar 2012
Location: Severance, Colorado
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0 litre, line 6
nice rig....and maybe sprocket got to drive his friends rig to get them beer...just saying there both from az lol
05-18-2012, 05:50 PM
#220
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Arizona
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Thanks again for all the complaints. I hope to have some updates soon on everything thats been going on. Been rebiulding the top end of the engine and finding all kinds of things in the prosess that needs replaceing. 
. Flywheel, freeze plugs, cleaning up the wiring under the hood. I should have taken a picture of that mess. Got some lights on the bumper, Alarm, A/C system, and some transmission temp. guages. Take it easy all.
. Flywheel, freeze plugs, cleaning up the wiring under the hood. I should have taken a picture of that mess. Got some lights on the bumper, Alarm, A/C system, and some transmission temp. guages. Take it easy all.
05-22-2012, 12:05 PM
#223
CF Veteran
Join Date: Feb 2012
Location: Forest Hill, Maryland
Posts: 6,468
Likes: 0
Received 18 Likes
on
14 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
I think this is my favorite jeep on here. will be basing mine off of this one. tent's looking good. I'm going to building a tent platform to put on my roof rack. I'm thinking 4 4x8s of plywood, and then 4x4s to hold it up. will fold up like a board game, and the tent will just go ontop of it. I know it's big, but I want the room and the awesomeness of sleeping uptop = D
08-29-2012, 01:00 PM
#224
Seasoned Member
Join Date: Dec 2011
Location: Southwest Florida
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Updates on some more that I've been doing to my jeep. I will go get the tires and wheels in the morning so i had to finish cutting the fenders. Here are a few picts. of the prosess.
This is the original fender in the front.
My first attempt. I tryed to bend the fender and it looked like crap so i cut it again.
and this was the final cut. I went and picked up some molding to line the fender with. I have some picts of that later.
After that I got a wild hair and desided to paint the jeep. Heres a shot of the redneck paint booth I made in the garage out of painters plastic. I had a few beers. Seemed like a good idea.
And the end result. Not to bad for 11 cans of RUST-OLEUM Camo Tan paint and 2 cans of RUST-OLEUM Matte clear coat.
The final install on the fender. The molding that I picked up to line the edge of the fender.
And then cutting the rear tonight for the tire install in the morning. Sorry I didnt get a before picture. My phone has been acting up and it didnt save it.
The
Well I have a picture of the rear completed but my PC desided to act up. Ill try to get it up in the next day or 2. Take it easy all.
This is the original fender in the front.
My first attempt. I tryed to bend the fender and it looked like crap so i cut it again.
and this was the final cut. I went and picked up some molding to line the fender with. I have some picts of that later.
After that I got a wild hair and desided to paint the jeep. Heres a shot of the redneck paint booth I made in the garage out of painters plastic. I had a few beers. Seemed like a good idea.
And the end result. Not to bad for 11 cans of RUST-OLEUM Camo Tan paint and 2 cans of RUST-OLEUM Matte clear coat.
The final install on the fender. The molding that I picked up to line the edge of the fender.
And then cutting the rear tonight for the tire install in the morning. Sorry I didnt get a before picture. My phone has been acting up and it didnt save it.
The Well I have a picture of the rear completed but my PC desided to act up. Ill try to get it up in the next day or 2. Take it easy all.
I'm sorry if someone already asked this, but your paint is just rustoleum camo tan? I'm trying to find the best color tan out there but all the ones I find are too light or have too much of a yellow tint
09-03-2012, 11:49 AM
#225
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Arizona
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Yeap. It's rustoleum camo tan. The color matchs well to the desert out here.
I bought it at walmart. Heres the link to look at the colors
http://www.walmart.com/ip/Rust-Oleum...Green/19395289
I bought it at walmart. Heres the link to look at the colors
http://www.walmart.com/ip/Rust-Oleum...Green/19395289