built not bought '89 build
#169
Thread Starter
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
Thanks for all the good replys! This is just the start of this build, as I just got into my garage!
Ya & I looked at that tailbone install page 100 time, but didn't realize how solid the system is tell I put it together...
Ya & I looked at that tailbone install page 100 time, but didn't realize how solid the system is tell I put it together...
#170
Seasoned Member
Joined: Mar 2010
Posts: 470
Likes: 0
From: Harker Heights, Texas
Year: 2002
Model: Grand Cherokee (WJ)
Engine: 4.7L
yeah went through it tonight and was like hmmmm..but it looks sweet and you keep the factory look to it so i can't pass it up kinda pricey, but it will come later.
#171
Thread Starter
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
Not that pricey really if you compare it to the other tire carriers with tow points! Plus most back bumpers mount with just the 8 factory bolts, this mounts to the body with 19 to the body & 9 bolts hold the tire carrier/bumper skin in place! If you can find a bumper cheaper & better built you better buy it!
#176
Thread Starter
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
^^^ lol ya long story short when over heating on a trail getting power to your fan over rules the need for a horn!!!
Replaced those gapeing holes under my hood with engine mounts today!
Replaced those gapeing holes under my hood with engine mounts today!
Last edited by builtnotbought89'; 05-20-2010 at 01:04 AM.
#178
Thread Starter
CF Veteran
Joined: May 2009
Posts: 6,328
Likes: 1
From: SLC, UT
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
Ya I wanted to go with ironman's mounts, but A- I don't have the money & B- I don't have time for shipping, cause I'll be leaving for MOAB on the 27th!!!
#179
Senior Member
Joined: Mar 2010
Posts: 500
Likes: 0
From: Logan, UT
Year: 1989
Model: Cherokee
Engine: 4.0L i6
How difficult is it to change the motor mounts ? I have read several clear tutorials, it doesn;t look too bad. What kind of problems I WILL encounter other than stuck bolts possibly ?
The tutorials say that you have to remove the oil filter / ring thingy..... mine is not leaking at the moment I am kind of nervous to touch it.... can I get away without removing that ?
The tutorials say that you have to remove the oil filter / ring thingy..... mine is not leaking at the moment I am kind of nervous to touch it.... can I get away without removing that ?
#180
CF Veteran
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.