Finally Got it!!!!!!
#121
CF Veteran
Thread Starter
Join Date: May 2009
Location: AL
Posts: 1,537
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0l
small update, i got some quick disconect links:
tried em out today, pretty hard to disconect without alittle PB, but mabe they just need some breakin in....
Flexed her out pretty good:
Rubbed alittle, pooped the fender halfway off:
and i got a new antena for my CB
i also did some sweet donuts on a feild of dirt... awesome fun...
tried em out today, pretty hard to disconect without alittle PB, but mabe they just need some breakin in....
Flexed her out pretty good:
Rubbed alittle, pooped the fender halfway off:
and i got a new antena for my CB
i also did some sweet donuts on a feild of dirt... awesome fun...
#124
Senior Member
Join Date: Apr 2009
Location: Ontario
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98' and 99'
Model: Cherokee
Engine: 4.0
hate to burst your bubble Leo, but , your gonna hate those quick disconnects in a couple months.
The problem with those is the hole starts to open up, and eventually the noise alone will force you to buy new ones
The problem with those is the hole starts to open up, and eventually the noise alone will force you to buy new ones
Last edited by JSwamper; 02-22-2010 at 11:15 AM.
#126
CF Veteran
Thread Starter
Join Date: May 2009
Location: AL
Posts: 1,537
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0l
thanks alot everybody!
hmmm... havent heard that... you think theres anything i can do to prevent that??
mabe if the holes open up, i could wrap some tape around the pins to reduce noise...
i geuss ill see when i get ther...
Matt, ive been thinkin about that flowmaster, i really wann come down there and get it... lol
is that 2.5 inch pipe you have alreaddy bent??
mabe if the holes open up, i could wrap some tape around the pins to reduce noise...
i geuss ill see when i get ther...
Matt, ive been thinkin about that flowmaster, i really wann come down there and get it... lol
is that 2.5 inch pipe you have alreaddy bent??
#127
Senior Member
Join Date: Apr 2009
Location: Ontario
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98' and 99'
Model: Cherokee
Engine: 4.0
[QUOTE=leo3000;439305
mabe if the holes open up, i could wrap some tape around the pins to reduce noise...
QUOTE]
Lol,, its funny that you say that, cause i tried doing the same thing. I even tried fitting small rubber grommets in the hole, but I eventually gave up and bought some fixed end links,,, If I were to get ones again it would deffinatly be JKS
mabe if the holes open up, i could wrap some tape around the pins to reduce noise...
QUOTE]
Lol,, its funny that you say that, cause i tried doing the same thing. I even tried fitting small rubber grommets in the hole, but I eventually gave up and bought some fixed end links,,, If I were to get ones again it would deffinatly be JKS
#128
CF Veteran
Thread Starter
Join Date: May 2009
Location: AL
Posts: 1,537
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0l
[QUOTE=JSwamper;439331]
Lol,, its funny that you say that, cause i tried doing the same thing. I even tried fitting small rubber grommets in the hole, but I eventually gave up and bought some fixed end links,,, If I were to get ones again it would deffinatly be JKS
i would have, but 150 bucks is a little steep for a swybar link, IMO...
Originally Posted by leo3000;439305
mabe if the holes open up, i could wrap some tape around the pins to reduce noise...
QUOTE
mabe if the holes open up, i could wrap some tape around the pins to reduce noise...
QUOTE
Lol,, its funny that you say that, cause i tried doing the same thing. I even tried fitting small rubber grommets in the hole, but I eventually gave up and bought some fixed end links,,, If I were to get ones again it would deffinatly be JKS
#130
CF Veteran
Thread Starter
Join Date: May 2009
Location: AL
Posts: 1,537
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0l
well, i have another small update..
The jeep had been running terrible for the last 3 weeks or so, conking out, tach was going crazy, and i was getting about 8 MPG, average.
i had been suspecting an o2 sensor for a while, then it wasnt shifting well, so thanks to the forum i boiled it down to the TPS...
then finally my CEL came on, so i went and got it checked and it said i had a bad TPS, a bad o2 sensor, an evap leak, and a misfire in cylender 3
so i went to the auto parts store and got all that stuff and a vaccum line and put it in today, and, my gosh i dont think ive had a nicer ride in my life, it was amazing
heres the stuff i got:
and i made some BPE's outa the old rear swaybar mounts and the sleeve inside the old swaybar bushing:
The jeep had been running terrible for the last 3 weeks or so, conking out, tach was going crazy, and i was getting about 8 MPG, average.
i had been suspecting an o2 sensor for a while, then it wasnt shifting well, so thanks to the forum i boiled it down to the TPS...
then finally my CEL came on, so i went and got it checked and it said i had a bad TPS, a bad o2 sensor, an evap leak, and a misfire in cylender 3
so i went to the auto parts store and got all that stuff and a vaccum line and put it in today, and, my gosh i dont think ive had a nicer ride in my life, it was amazing
heres the stuff i got:
and i made some BPE's outa the old rear swaybar mounts and the sleeve inside the old swaybar bushing:
#131
CF Veteran
Join Date: Oct 2009
Location: Parrish
Posts: 1,487
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Comanche
Engine: 4.0
Nice jeep. I am right now where you were at the beginning of this thread having just bought your first vehicle and not having a dime to your name. Hopefully I will be able to get started on the jeep a few months from now. I also thought it was funny that you got the power steering hose replaced as thats the only thing engine wise I need.
#134
CF Veteran
Thread Starter
Join Date: May 2009
Location: AL
Posts: 1,537
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0l
I have a few smalll updates...
I put in some adjustable rancho 9000's in the back, my old shocks cuttoff about 3 inches of droop, and these allow for full droop but cuttoff about 1inch of uptravel, wich i figure is a fair tradeoff...
I also put on my BPE's and shortenened my quick discos so it rides good again
and i made a custom sticker:
I put in some adjustable rancho 9000's in the back, my old shocks cuttoff about 3 inches of droop, and these allow for full droop but cuttoff about 1inch of uptravel, wich i figure is a fair tradeoff...
I also put on my BPE's and shortenened my quick discos so it rides good again
and i made a custom sticker: