Jeep Cherokee xj w/ one tons and 40's
#151
Seasoned Member
Thread Starter
Join Date: Jul 2013
Location: Clinton, SC
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Crossmember is in. Still got some bracing to complete finish welding it to the unibody and upper link mounts but, for the most part it’s complete.
Last edited by Acerwin; 06-12-2018 at 02:38 PM.
#153
Seasoned Member
Thread Starter
Join Date: Jul 2013
Location: Clinton, SC
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
#156
Seasoned Member
Thread Starter
Join Date: Jul 2013
Location: Clinton, SC
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
#157
Seasoned Member
Thread Starter
Join Date: Jul 2013
Location: Clinton, SC
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Ordered some rough country 4.5” leaf springs. Figured these will do because I’ll 4 link the rear here shortly.
#159
Seasoned Member
Thread Starter
Join Date: Jul 2013
Location: Clinton, SC
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
#160
Seasoned Member
Thread Starter
Join Date: Jul 2013
Location: Clinton, SC
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
We got the rear axle out today along with the rear quarter panel trimmed some more for a custom rear bumper. Can’t thank a buddy enough for coming down to lend a hand.
Last edited by Acerwin; 06-12-2018 at 02:39 PM.
#162
CF Veteran
Join Date: Dec 2011
Location: PA KOTUFU!
Posts: 1,777
Likes: 0
Received 18 Likes
on
17 Posts
Year: 1998
Engine: 4.0L 162,000
I like the height/looks when it is at the level of the top of the wheel/rim when mounted on your desired set of tires.
Your's looks to be about 2-3" above that 'top of the wheel/rim' height.
Your's looks to be about 2-3" above that 'top of the wheel/rim' height.
#163
Seasoned Member
Thread Starter
Join Date: Jul 2013
Location: Clinton, SC
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Probably just gonna go down to 23.5” or 24” frame height. Rather not ride on my bump stops all the time
#164
No, I don't lick fish.
#165
Member
Join Date: Oct 2014
Location: Tucson, AZ
Posts: 114
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2001
Model: Cherokee
Engine: 4.0/242 I6
I'm no engineer, but the tires will squish with when loaded and especially at low psi. That could easily bring you down an inch or two? I might be simplifying it too much, but I certainly don't think you'll be that high 'trail-ready'. Just my two-cents... which is worth only about two cents.