the limited hero
#17
::Regional Moderator::
Thread Starter
Join Date: Jun 2012
Location: clackamas,or
Posts: 422
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee(XJ)
Engine: h.o. 4.0l
Haven't got any work time since the hoildays started. Did get some work done on the zj dd. The door had a sagging door pin caused by worn out hinge bushing and the door metal cracked at the lock mechanism. I replaced the door with one really close to the same color same pin stripe. It took some time and a couple visits to the junkyard. And the hinge pins weren't as bad but had play so I changed them out too. Hopefully ill getting some more time on the limited hero soon
#18
::Regional Moderator::
Thread Starter
Join Date: Jun 2012
Location: clackamas,or
Posts: 422
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee(XJ)
Engine: h.o. 4.0l
Hope everyone had a good Christmas. I got new years eve off. And sound like plans are going to be where my jeep sits so hopefully I can get some time working on it. I got to button up the drive front then do the same on the passenger side. Bpe relocate brake line remove abs wiring to hub. And cut and fold inner fender pinch seam. Then If I have time start work on a simple rear bumper.
#19
CF Veteran
Join Date: Nov 2010
Location: some small town oregon
Posts: 15,581
Likes: 0
Received 8 Likes
on
8 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Hope everyone had a good Christmas. I got new years eve off. And sound like plans are going to be where my jeep sits so hopefully I can get some time working on it. I got to button up the drive front then do the same on the passenger side. Bpe relocate brake line remove abs wiring to hub. And cut and fold inner fender pinch seam. Then If I have time start work on a simple rear bumper.
#23
::Regional Moderator::
Thread Starter
Join Date: Jun 2012
Location: clackamas,or
Posts: 422
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee(XJ)
Engine: h.o. 4.0l
Well no work today been at the hospital most of the day as my son decided today was the day to show still waiting for him to show.
#28
::Regional Moderator::
Thread Starter
Join Date: Jun 2012
Location: clackamas,or
Posts: 422
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee(XJ)
Engine: h.o. 4.0l
It is I cried when I seen him out of pure joy. And got a name now lol Eric James Nelson-Lopez
Last edited by 89limited_hero; 01-01-2015 at 12:10 PM.
#30
::Regional Moderator::
Thread Starter
Join Date: Jun 2012
Location: clackamas,or
Posts: 422
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee(XJ)
Engine: h.o. 4.0l
Little update I have everything on the front done but longer brake lines. So in the next weekend or two I will be moving on to the rear. Doing shackles bpe for the rear shocks and remove the blocks that are in place. They are only 1" but thats just lift no usable flex.