My 2wd XJ
#1051
Thread Starter
CF Veteran
Joined: Oct 2009
Posts: 5,390
Likes: 3
From: Chicago IL
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
#1053
Thread Starter
CF Veteran
Joined: Oct 2009
Posts: 5,390
Likes: 3
From: Chicago IL
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
#1054
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
But it needs the drop pitman arm because the mount drops the track bar so much... In their head the TB and drop pitman arm drop everything to keep DW or bump steer away But it might drop it enough for you not doing the pitman arm drop
#1055
Thread Starter
CF Veteran
Joined: Oct 2009
Posts: 5,390
Likes: 3
From: Chicago IL
Year: 1997
Model: Cherokee
Engine: 4.0 Straigh 6
My thoughts exactly. As long as I keep the drag link over the pitman arm.
#1056
If u swap out your track bar to the RC one, you maybe able to use the stock pitman arm, and put the drag link on bottom of the arm and still keep the 2 parallel.
Just a warning tho. The RC track bar is a pos in my opinion, I have one and it's ****. Thin wall, small, the Hiem joint they supply for the axle end is tiny and very weak, and the frame side bushing wears quickly.
Just a warning tho. The RC track bar is a pos in my opinion, I have one and it's ****. Thin wall, small, the Hiem joint they supply for the axle end is tiny and very weak, and the frame side bushing wears quickly.
#1064
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output