And Now For Something Completely Different - Clown's YJ Build
#453
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 13 Likes
on
12 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Historic is 30 years here. Odd as we use much more road salt... 20 years should be no problem down there :P Emissions are still required '88 or newer.
#459
Moderator of Jeeps
Thread Starter
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Magnets weren't working as well as I'd hoped, and the can was sliding around. The vibrations were also causing the ceramic magnets to chip and flake. Since I picked up a 40mm box for the opposite side, I decided to go ahead and bolt them both down.
Then I decided last minute to bolt down my extra for use as a center console. It'll be nice to keep stuff dry and not blowing away when the doors are off
While I was at it, I cleaned up a bit, rearranged/organized some stuff, and stood up the HiLift. I just used zip ties, but it's secure, it's easy to remove, and I can remount it there for a few cents.
Then I decided last minute to bolt down my extra for use as a center console. It'll be nice to keep stuff dry and not blowing away when the doors are off
While I was at it, I cleaned up a bit, rearranged/organized some stuff, and stood up the HiLift. I just used zip ties, but it's secure, it's easy to remove, and I can remount it there for a few cents.
#465
Moderator of Jeeps
Thread Starter
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Lol I sold the red one after two days and ordered a black one.
Mounted the 35s last night. These Metalcloaks look appropriate now I can't wait to get the matching rears, but I have other stuff I need to take care of first.
Before:
After:
And because it's such a nice day:
Also, this is Sarge. My buddy bought it for his son so they have a project to work on together. It's his oldest son's first Jeep.
And from last night because I like the picture:
Mounted the 35s last night. These Metalcloaks look appropriate now I can't wait to get the matching rears, but I have other stuff I need to take care of first.
Before:
After:
And because it's such a nice day:
Also, this is Sarge. My buddy bought it for his son so they have a project to work on together. It's his oldest son's first Jeep.
And from last night because I like the picture: