The Poser project
#76
No, I don't lick fish.
Good progress man! I'll bet you're glad to be getting back to it. Love those wheels... Black Rock?
#78
Seasoned Member
Thread Starter
Join Date: Apr 2009
Posts: 317
Likes: 0
Received 1 Like
on
1 Post
Year: 1998, 1999
Model: Cherokee
Engine: 4.0 I6
ordered:
np231 seal/ gasket kit
plug ends for welding extension cord and adapter for 240v power
oil pan and valve cover gaskets, rear main seal since i'm in there
boostwerks shift linkage. hoping I don't have buyers remorse since really, I could make it myself.
h.d. offroad no lift relocation brackets
debating the WJ steering swap since I need new hubs anyway, and better brakes and steering would be nice with 33's. but so much $$$ in one shot, especially when I do stuff like whats in the pictures below.
Picked this up yesterday.
black jeep got some audio upgrades
new to the jeep old to me sub (way too loud for me, I usually leave it off)
new Pioneer bluetooth/ hands free radio, I like it quite a bit. Will probably end up putting it in my red 98 as well.
pretty sure I just found my welder table top.
np231 seal/ gasket kit
plug ends for welding extension cord and adapter for 240v power
oil pan and valve cover gaskets, rear main seal since i'm in there
boostwerks shift linkage. hoping I don't have buyers remorse since really, I could make it myself.
h.d. offroad no lift relocation brackets
debating the WJ steering swap since I need new hubs anyway, and better brakes and steering would be nice with 33's. but so much $$$ in one shot, especially when I do stuff like whats in the pictures below.
Picked this up yesterday.
black jeep got some audio upgrades
new to the jeep old to me sub (way too loud for me, I usually leave it off)
new Pioneer bluetooth/ hands free radio, I like it quite a bit. Will probably end up putting it in my red 98 as well.
pretty sure I just found my welder table top.
#84
Seasoned Member
Thread Starter
Join Date: Apr 2009
Posts: 317
Likes: 0
Received 1 Like
on
1 Post
Year: 1998, 1999
Model: Cherokee
Engine: 4.0 I6
got the H.D. engineering no lift shackle relocation boxes and a new clock spring yesterday(black jeep stole the other one). Will probably order the JKS shackles to go with the boxes.
#87
Seasoned Member
Thread Starter
Join Date: Apr 2009
Posts: 317
Likes: 0
Received 1 Like
on
1 Post
Year: 1998, 1999
Model: Cherokee
Engine: 4.0 I6
Lug nuts, valve cover gasket, oil pan gasket, rear main seal(just in case), oil pan gasket, np231 seal kit, boostwerks shifter linkage for ax15, I think that is all that is pictured. I have some more interesting parts in the garage/ on order that I'll post up when I get some garage time.
#88
No, I don't lick fish.
Lug nuts, valve cover gasket, oil pan gasket, rear main seal(just in case), oil pan gasket, np231 seal kit, boostwerks shifter linkage for ax15, I think that is all that is pictured. I have some more interesting parts in the garage/ on order that I'll post up when I get some garage time.
#89
Seasoned Member
Thread Starter
Join Date: Apr 2009
Posts: 317
Likes: 0
Received 1 Like
on
1 Post
Year: 1998, 1999
Model: Cherokee
Engine: 4.0 I6
No time for the garage but here are a couple pictures of some stuff I've been working on. Still need to order some stuff.
front skid and gas tank skid, near perfect condition, WJ knuckles that need a good cleaning.
junk yard brakes for cores, new calipers and rotors for the front, ruffstuff 1 ton steering, 01 xj hub bearings, zj rear brake backing plates (I have everything for the rear now i think) not shown are the spicer ball joints that are around somewhere. also ruff stuff offset bracket for track bar. still thinking about the track bar set up. hate to cut up my brand new Clayton Offroad track bar, might build one with heims.
front skid and gas tank skid, near perfect condition, WJ knuckles that need a good cleaning.
junk yard brakes for cores, new calipers and rotors for the front, ruffstuff 1 ton steering, 01 xj hub bearings, zj rear brake backing plates (I have everything for the rear now i think) not shown are the spicer ball joints that are around somewhere. also ruff stuff offset bracket for track bar. still thinking about the track bar set up. hate to cut up my brand new Clayton Offroad track bar, might build one with heims.