Project Danger Cart
#181
☠ CF Sheriff ☠
Thread Starter
got the TJ flares on the rear only today - putting flares on the rear of an XJ sucks *****. They look decent...not totally happy with how the rears look (mostly at the break point) but I don't plan to have them on the jeep too long.
Front should be cake though. Will try to tackle that tomorrow after work.
Front should be cake though. Will try to tackle that tomorrow after work.
Last edited by dukie564; 11-06-2014 at 04:22 PM.
#182
☠ CF Sheriff ☠
Thread Starter
#183
CF Veteran
Join Date: Feb 2012
Location: Mt Airy, MD
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997/2000
Model: Cherokee
Engine: both 4.0's
TJ Rear Flares are all mounted up
Attachment 257950
Drove it to work today - held steady at 80mph with no vibrations or wandering!
Attachment 257950
Drove it to work today - held steady at 80mph with no vibrations or wandering!
looking good...
Last edited by dukie564; 11-06-2014 at 04:23 PM.
#186
☠ CF Sheriff ☠
Thread Starter
so updated my tally sheet for the costs associated with this lift....really shows the benefit of patience and doing things yourself...
Part - Source - My Cost (adjusted for $ I recouped selling the extra)
Extended SS Brake Lines (RC) - Craigslist - $40.00
4" TJ Coils (Currie) - Craigslist - $50.00
4" Adjustable LCAs w/ JJ both ends (Currie) - Craigslist - $45.00
Durango Leaf Pack & Shackles - Junkyard - $28.00
Leaf Spring Bushings - JF Classified - $30.00
HDOffroad Engineering Shackle Relocation Kit - Online/NAXJA - $95.00
Stock XJ Spring Packs - Junkyard - $28.00
Leaf Spring Liners - Online - $8.50
Slip Plate Paint - Online - $23.61
Disconnects - DIY - $15.00
Brake Line Bracket/Washer Kit - Rough Country - $4.90
Ubolts + Plates (GR.8) - Craigslist - $40.00
Bumpstops - TBD
IRO DS Trackbar and Bracket - Friend / Part Out - $160.00
TJ Flares - Trade - $0.00
Misc Hardware, Paint, Clamps - $50.00
Tires + Wheels (brand new) - Craigslist - $800.00
Shocks (brand new Teraflex JK takeoffs) - Craigslist - $100.00
Total = $800 in wheels/tires, and $718 in top quality lift components, oh, and a TON of time
Part - Source - My Cost (adjusted for $ I recouped selling the extra)
Extended SS Brake Lines (RC) - Craigslist - $40.00
4" TJ Coils (Currie) - Craigslist - $50.00
4" Adjustable LCAs w/ JJ both ends (Currie) - Craigslist - $45.00
Durango Leaf Pack & Shackles - Junkyard - $28.00
Leaf Spring Bushings - JF Classified - $30.00
HDOffroad Engineering Shackle Relocation Kit - Online/NAXJA - $95.00
Stock XJ Spring Packs - Junkyard - $28.00
Leaf Spring Liners - Online - $8.50
Slip Plate Paint - Online - $23.61
Disconnects - DIY - $15.00
Brake Line Bracket/Washer Kit - Rough Country - $4.90
Ubolts + Plates (GR.8) - Craigslist - $40.00
Bumpstops - TBD
IRO DS Trackbar and Bracket - Friend / Part Out - $160.00
TJ Flares - Trade - $0.00
Misc Hardware, Paint, Clamps - $50.00
Tires + Wheels (brand new) - Craigslist - $800.00
Shocks (brand new Teraflex JK takeoffs) - Craigslist - $100.00
Total = $800 in wheels/tires, and $718 in top quality lift components, oh, and a TON of time
Last edited by dukie564; 06-07-2012 at 09:08 AM.
#188
☠ CF Sheriff ☠
Thread Starter
lol...yea i'm very patient and cunning...i'm like a craigslist ninja
#189
Member
Join Date: May 2012
Location: Oklahoma City
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: I6 4.0L 242
Stoked on all of your JY finds...I live in BFE and its a decent drive to find any You-pulls or JY to try and cannibalize other vehicles. Especially in looking for axles and gears
Definitely coming back for some ideas!
Definitely coming back for some ideas!
#190
☠ CF Sheriff ☠
Thread Starter
#191
☠ CF Sheriff ☠
Thread Starter
Shakedown complete!
Locker definitely needs to either get removed or fixed. I'll be calling Richmond Gear on Monday to see what they think is going on, but it's definitely not good - it's unloading very violently and loudly (you'll hear it in the video below).
Other than that everything is working gravy. Ended up high centering my LCA mount on a big *** rock, bent on side a little and got some scratches but hey - had to happen eventually. I'm gonna see if I can get someone to weld on my LCA skids before Rausch in 2 weeks for some more piece of mind.
Anyways, pics and video:
Pretty damn good flex for short arms - limiting factor is when the LCAs hit the shock mount. Fender openings, shocks, and rear springs all have quite a bit of flex room left
And here's me on a rock - yes, my tire is just hanging out in space...
And everyone likes video! Notice the load *** snapping of my locker unloading
Locker definitely needs to either get removed or fixed. I'll be calling Richmond Gear on Monday to see what they think is going on, but it's definitely not good - it's unloading very violently and loudly (you'll hear it in the video below).
Other than that everything is working gravy. Ended up high centering my LCA mount on a big *** rock, bent on side a little and got some scratches but hey - had to happen eventually. I'm gonna see if I can get someone to weld on my LCA skids before Rausch in 2 weeks for some more piece of mind.
Anyways, pics and video:
Pretty damn good flex for short arms - limiting factor is when the LCAs hit the shock mount. Fender openings, shocks, and rear springs all have quite a bit of flex room left
And here's me on a rock - yes, my tire is just hanging out in space...
And everyone likes video! Notice the load *** snapping of my locker unloading
Last edited by dukie564; 11-06-2014 at 04:25 PM.
#192
☠ CF Sheriff ☠
Thread Starter
so...took the locker out. No damage to the drivers or broken pins, so must be worn out springs. Will be ordering new springs/pins soon and will try again at a later date.
Until then running spider gears and it drives amazingly smooth
Until then running spider gears and it drives amazingly smooth
#194
☠ CF Sheriff ☠
Thread Starter
sexified my front/rear bumpers and front clip last night - repainted them with that rustoleum trim/bumper paint with the picture of a cherokee on the can - **** looks mint
And in case I decide to mount any rocks with my LCA again this weekend - by bud Alex welded on my JCR Mini Skids - MOAR PROTEKSHUN!
And I also pop riveted and sealed up the rear quarter panels
So...all that's left for this upcoming trip this weekend is to install a thumb throttle, which I picked up the parts for yesterday, and apply some di-electric grease to my sensor/underhood connections. Then pack up the truck to head out Friday morning!
And in case I decide to mount any rocks with my LCA again this weekend - by bud Alex welded on my JCR Mini Skids - MOAR PROTEKSHUN!
And I also pop riveted and sealed up the rear quarter panels
So...all that's left for this upcoming trip this weekend is to install a thumb throttle, which I picked up the parts for yesterday, and apply some di-electric grease to my sensor/underhood connections. Then pack up the truck to head out Friday morning!
Last edited by dukie564; 11-06-2014 at 04:26 PM.
#195
☠ CF Sheriff ☠
Thread Starter
Also I took a measurement for the lift height the other night - rear did settle a bit - sitting currently at just under 5" over stock with my spare tire and tools in the back. Front it at ~6" over stock - so i'll be trimming the front spacer ~1" down the road to level it out