Project - "Finally Ours"
#241
Banned
Thread Starter
Join Date: Oct 2009
Location: West Springfield, MA
Posts: 2,231
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
Well thanks to stealthcherokee i got my knucklebone mounted up original problem was the hitch pin didn't line up and even if i drilled the anti-rattle would effect it...so his idea was put the receiver part in just enough to use the anti-rattle and put a bolt in then use YJ shackles to connect that pin to the other pin thus securing it all:
copyright of Jeeper's Union
copyright of Jeeper's Union
#243
CF Veteran
Join Date: Mar 2009
Location: Westfield, MA
Posts: 2,287
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999.
Model: Cherokee
Engine: 4.0, I6
long as its sturdy itll do the trick ntm i like how your tire sits way lower bc your using a hitch not a reciever on a after market bumper, so the tire wont completely block ur rear window. good looks brotha
#244
Banned
Thread Starter
Join Date: Oct 2009
Location: West Springfield, MA
Posts: 2,231
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
Well got the parts jeep gone today proceeds gone to stealthcherokee as part of deal...and since i have a tire carrier i put my back seat in and installed my front speakers which sound amazing...
#245
Banned
Thread Starter
Join Date: Oct 2009
Location: West Springfield, MA
Posts: 2,231
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
This morning went to the mall and did more creeping on clayton3854:
Made a rear license plate bracket today very crude but it'll work then drilled another hole for an added pin on the knucklebone meanwhile a friend was tackling the surface rust on the doors...
Made a rear license plate bracket today very crude but it'll work then drilled another hole for an added pin on the knucklebone meanwhile a friend was tackling the surface rust on the doors...
#246
Member
Join Date: Apr 2012
Location: VA
Posts: 202
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Xj looking good man, and it's cool seeing both of them side by side. Clayton3854's build is one of the first I checked out when I got here (cause we both have the same white cherokee. Well... we did lol)
#253
Banned
Thread Starter
Join Date: Oct 2009
Location: West Springfield, MA
Posts: 2,231
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
Started installing my Rustys Offroad long arms and dont get me wrong greatest thing when installed but getting installed SUCKS...lol jeep is spending the night in buddies garage...
#254
Banned
Thread Starter
Join Date: Oct 2009
Location: West Springfield, MA
Posts: 2,231
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
Finally got the long arms fully installed today at about 5pm then went wheeling:
but on the whelling trip i went over a rock and decided it wanted to flip over and put a sizable dent in my floor which i later fixed with a hammer:
but on the whelling trip i went over a rock and decided it wanted to flip over and put a sizable dent in my floor which i later fixed with a hammer:
#255
Banned
Thread Starter
Join Date: Oct 2009
Location: West Springfield, MA
Posts: 2,231
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0
Well did my front u-joints as they were pretty overdue and sloppy...the adjusted out my left control arm as it was to short putting my alignment off and making me dog-leg...