Project: H.O.R.E.
#181
Senior Member
Join Date: Feb 2010
Location: Alto, MI
Posts: 938
Likes: 0
Received 1 Like
on
1 Post
Year: 2002
Model: Grand Cherokee
Engine: 4.7
Yea man the entire interior cage will be connected and triangulated. This is a work in progress. Until my fab shop opens I only have fridays and monday afternoon to work on her. Monday the interior cage and some of the exterior supports are going on and finish the cage next friday.
#184
Former Sponsor
Thread Starter
Join Date: Jul 2010
Location: Lyons, Colorado
Posts: 1,022
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
Thanks guys for all the comments. Just to clarify, the halo sticks way (3 inches) past the windshield so when I am done fabbing the side supports and the center support we will be able to replace the windshield when it breaks without cutting tubing. Same reason I did the bumper supports like I did. I have to get the bezel off to replace headlights and blinker light. This is going to be my DD for a while so I need lights and not smashed windshields. As for the bumper I'm not sure how you would get it much closer to the body with a winch on it. Plus I gained a lot of approach angle when I did the lift and 35s. Side supports and triangulating the interior cage today wish me luck.
Last edited by Hooligan Off Road; 06-27-2011 at 08:50 AM.
#185
Former Sponsor
Thread Starter
Join Date: Jul 2010
Location: Lyons, Colorado
Posts: 1,022
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
She is starting to come together. We got the front and back supports on and the interior pieces cut notched and painted. We are hoping Friday will be a productive day and we can have the cage 90%. Gotta put the air compressor and air tank back in so she will be locked again. doin a motor mount tomorrow and t-stat if I have time. Puttin the skid plates back on and hopefully take her out for a real shakedown run on Saturday!! Man I am dying to get on the trail again, it's been too long.
#193
Junior Member
Join Date: Jun 2011
Location: Taranaki, New Zealand
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 40L HO
Hey man, Great build, I have to ask how much weight do you think you have added and are you still running the D30 up front, I have been uming and rrring about 33''s or the 36'' TSL SX that I have, and I have to say the 35s don't look out of place on this truck. You may have helped me decide. cheers Mate