Red xj
#212
Senior Member
Joined: Oct 2010
Posts: 562
Likes: 0
From: Pagosa Springs, Colorado
Year: 88-ish
Model: Cherokee
Engine: 4.0 I6
So I decided there has to be a better way to air back up after a ride that does not involve 5.00 worth of quarters.I researched a bunch on OBA setups and decided a 400.00 or so Vlair or something similar was not in my budget and a ran across the MV50 by SuperFlow on a Toyota forum and some other places and few people had anything bad to say about it.Smitty Built sales em also through Summit but I found one at Orielys for 69.00.I didnt like the gauge right away.. it was a lil off so I bought another one at Home Depot and stuck it on,I decided to hard mount it in the back so I didnt have to drag it out the bag every time I wanted to use it.I just ran the pos side up the batt and grounded it to the chassis in the rear.I am very impressed with this lil guy I tested it by airing my 33x 12.50s down to 15psi which is what I usually run off road and hooking up the compressor,it took right at 2min to air back up to 35psi!faster than the stupid gas station!I might hook it to a small air tank in the future.The mv50 is also called a mv1050 sometimes too btw.Not saying its better than a ARB or Vlair because I have never owned one but its working good for me so far]
Did you have to run an inverter to hook this up or is it already wired up for the 12v system?
#213
Thread Starter
CF Veteran
Joined: May 2010
Posts: 1,626
Likes: 1
From: Maryville Tennessee
Year: 1995
Model: Cherokee
Engine: 4.0 L
#214
Originally Posted by duncan807
ha i have got hids so if u would like pics or how i put them in just ask
sweet build i hope it keeps moving
sweet build i hope it keeps moving
Brandon
#216
Member
Joined: Mar 2011
Posts: 134
Likes: 0
From: Little Mountain, SC
Year: 1994
Model: Cherokee
Engine: 4.0
very cool build, i would like to do the drawers in my rear cargo area to but i haul to much big stuff that wouldn't fit if i did that.. same with my friends telling me i should put some subs in lol
#217
Thread Starter
CF Veteran
Joined: May 2010
Posts: 1,626
Likes: 1
From: Maryville Tennessee
Year: 1995
Model: Cherokee
Engine: 4.0 L
#218
CF Veteran
Joined: Sep 2009
Posts: 1,471
Likes: 3
From: Knoxville, TN
Year: 1998
Model: Cherokee
Engine: 4.0 inline 6 (o yea!)
I dont think I will be ready for a ride for a little while, I am currently bumperless. I met with Joe yesterday to design them and take measurements. He said we could start next week. I need to fold QPs soon though!
#219
Thread Starter
CF Veteran
Joined: May 2010
Posts: 1,626
Likes: 1
From: Maryville Tennessee
Year: 1995
Model: Cherokee
Engine: 4.0 L
I am down to do that too.gonna do 95WhiteXjs coil and shackle lift at my house on Sat if you want come by and we could do our 1/4s too
#220
Thread Starter
CF Veteran
Joined: May 2010
Posts: 1,626
Likes: 1
From: Maryville Tennessee
Year: 1995
Model: Cherokee
Engine: 4.0 L
Cut my Rear lower 1/4s
Cut my rear lower 1/4s finally...Thanks for loaning me your reciprocating saw Sgtskid!Would have been way hard with a grinder and jig saw.!
#221
Originally Posted by Skunkape
Cut my rear lower 1/4s finally...Thanks for loaning me your reciprocating saw Sgtskid!Would have been way hard with a grinder and jig saw.!
#224
Thread Starter
CF Veteran
Joined: May 2010
Posts: 1,626
Likes: 1
From: Maryville Tennessee
Year: 1995
Model: Cherokee
Engine: 4.0 L
Yanked my rear axle out to day in preparation for the new one.Projectmayhem came by and picked it up and was kind enough to help me install my new Rustys adj track bar and track bar drop bracket while he was here!Thanks man.
#225
Originally Posted by Skunkape
Yanked my rear axle out to day in preparation for the new one.Projectmayhem came by and picked it up and was kind enough to help me install my new Rustys adj track bar and track bar drop bracket while he was here!Thanks man.