01 wj drive train
#1
Junior Member
Thread Starter
01 wj drive train
Hello all, we just purchased a 2001 wj. I was able to drive it home but she runs rough. We knew it had a blown head gasket at the start but I got it home and checked the oil. Someone had over filled the motor about a quart.
the blown head gasket plus oil overload doesn’t sound like it will be a good combination. When I change the oil and head gasket, what should I inspect while I have the top disassembled? Should I tear down the valve cover and check rods? If a rod is bent should I replace them all? How screwed am I?
the blown head gasket plus oil overload doesn’t sound like it will be a good combination. When I change the oil and head gasket, what should I inspect while I have the top disassembled? Should I tear down the valve cover and check rods? If a rod is bent should I replace them all? How screwed am I?
#2
Old fart with a wrench
When you drain the oil, you may find that added quart is coolant.
The following users liked this post:
BlueRidgeMark (04-29-2020)
#3
CF Veteran
Join Date: May 2012
Location: Lost in the wilds of Virginia
Posts: 7,964
Received 956 Likes
on
771 Posts
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
What Dave said. Don't borrow trouble. You know you have to pull the head - start there.
Thread
Thread Starter
Forum
Replies
Last Post
iPodTouchMyself
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
11-12-2017 07:33 PM
otpracer
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
11-14-2012 07:13 PM
DeafPhysicalEducation
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
05-29-2012 02:25 PM
blkcherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
04-24-2012 08:36 AM
1992JeepCherokee4x4
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
42
03-11-2009 07:17 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)