2000 4.7 Running rough out of the blue.
#1
Seasoned Member
Thread Starter
Join Date: May 2014
Location: Nor Cal
Posts: 375
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 & 1994
Model: Grand Cherokee
Engine: 4.0
2000 4.7 Running rough out of the blue.
OK so I have a 2000 wj 4.7 auto 4x4. Last week I was driving it and it died out of the blue. It restarted right away but the code that popped up was P0725 and P0320. Figured it has 132K on it and I have only owned it for about a year+, I replaced the crankshaft position sensor with a new Mopar one. Ran fine for 3 days then today I started it, drove the half block from my house to the corner and made the turn and it died. I was able to get it restarted but it now seems like it is running on half the cylinders. Running very rough and smells like gas. I was able to limp it back to the house via 2 foot method but I had to grab my other vehicle so I would not be late to work today. I've been working crazy hours this past week so am beyond tired so my brain is not at it's peak performance to say the least. I will be messing with it when I get home and will borrow my friends scanner. Bad sensor from mopar? Something else? I had reman heads, new timing set, new plugs all done about 6 months ago and it had run flawlessly up until it died last week and today.
Thanks,
Max
Thanks,
Max
#3
Seasoned Member
Thread Starter
Join Date: May 2014
Location: Nor Cal
Posts: 375
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 & 1994
Model: Grand Cherokee
Engine: 4.0
OK so I had a few minutes yesterday to look at the jeep. Runs really rough, hard to start. No codes as of yet. I changed out the camshaft position sensor since I had it and there was no change. Gonna check the fuel pressure next as it seems like it's out of gas to some extent. I just wish I had more free time.
Max
Max