Amp bypass harness
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Location: fredericksburg virginia
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Grand Cherokee
Engine: 5.2
Amp bypass harness
Has anybody installed a amp bypass harness in a early gc i put one in mine because the amp wasnt working , i have tried a couple radios and it sounds the same like the amp isnt powering the speakers what am missing,
#3
Junior Member
Thread Starter
Join Date: Apr 2010
Location: fredericksburg virginia
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Grand Cherokee
Engine: 5.2
Thats what its supposed to do you plug it into the 2 amp plugs and run the harness up to the radio and splice the wires into the new radio . but it has no sound not unless all the speakers are blown i will probaly just run the wires directly to the speakers,
#4
Member
Join Date: Jul 2011
Location: lancaster Pa
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997 limited
Model: Grand Cherokee
Engine: 318 v8
i think those amps are a dime a dozen most people dont know what they are in the junkyard unless your a zj guy lol
#5
Old fart with a wrench
My 97 ZJ had a big bundle of taped slices under the back seat and an amp that was white with corrosion because the floor plate was open. The radio worked okay but you had to crank it way up to get any good sound out of it. Only the front speakers worked though.
#6
Junior Member
Thread Starter
Join Date: Apr 2010
Location: fredericksburg virginia
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Year: 94
Model: Grand Cherokee
Engine: 5.2
I called metra today the maker of the harness they said one of the speakers is shorted out and its throwing the radio into protection mode and thats why theres barely any sound . so tommorow ill pull the door panels and check each one with a multimeter till i find the bad one ,
Thread
Thread Starter
Forum
Replies
Last Post
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
10-03-2015 05:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)