Backspacing?
07-21-2009, 08:57 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2006
Model: Grand Cherokee
Engine: v6
Backspacing?
I am about to buy new rims. I have an 06 Grand Cherokee Laredo with stock rims and 235/65/17 tires on them. I'm going to be using the same tires with the new rims.
My question is, can I still use the same tires and have no rub with a 5.09 backspacing? If not what size do I need?
Thanks - GCL06
My question is, can I still use the same tires and have no rub with a 5.09 backspacing? If not what size do I need?
Thanks - GCL06
07-22-2009, 10:41 AM
#3
CF Veteran
Join Date: May 2008
Location: Bristol,Pa
Posts: 5,188
Likes: 0
Received 6 Likes
on
6 Posts
Year: 94
Model: Cherokee
Engine: 4.0L
You need to compare the stock backspacing to the backspacing on the wheels your considering.
If your keeping the same tire and not lifting the vehicle you dont want to make the track width too much wider.. as that could put the wheel/tire outside the fenderwell.
I just checked.. an 05 WK should have 6.25" BS, 5.00" would move the tire out 1 1/4" on each corner. Take a good look and turn wheels etc seeing if this size would work for you.
If your keeping the same tire and not lifting the vehicle you dont want to make the track width too much wider.. as that could put the wheel/tire outside the fenderwell.
I just checked.. an 05 WK should have 6.25" BS, 5.00" would move the tire out 1 1/4" on each corner. Take a good look and turn wheels etc seeing if this size would work for you.
Last edited by OverlandZJ; 07-22-2009 at 10:46 AM.
07-22-2009, 01:22 PM
#4
Junior Member
Thread Starter
Join Date: Jul 2009
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2006
Model: Grand Cherokee
Engine: v6
You need to compare the stock backspacing to the backspacing on the wheels your considering.
If your keeping the same tire and not lifting the vehicle you dont want to make the track width too much wider.. as that could put the wheel/tire outside the fenderwell.
I just checked.. an 05 WK should have 6.25" BS, 5.00" would move the tire out 1 1/4" on each corner. Take a good look and turn wheels etc seeing if this size would work for you.
If your keeping the same tire and not lifting the vehicle you dont want to make the track width too much wider.. as that could put the wheel/tire outside the fenderwell.
I just checked.. an 05 WK should have 6.25" BS, 5.00" would move the tire out 1 1/4" on each corner. Take a good look and turn wheels etc seeing if this size would work for you.
Thread
Thread Starter
Forum
Replies
Last Post
_spyder
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
02-03-2016 03:13 PM
her89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-26-2015 12:06 PM
FS[SouthEast]: 5 American Racing Torq Thrust Series 505 Rims
mattphillips90
Axles/Tires/Wheels
0
09-21-2015 08:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)