Bad Torque Convertor?? Need help
#1
Member
Thread Starter
Bad Torque Convertor?? Need help
I have a 97 zj with the 4.0. Just recently it statrted making a ohmost knocking sound coming from the transmission area which feels like its coming from the bellhousing(torque convertor area) when I drive at different times itll make the sound and sounds like a rattling and sometimes when i go to certain gears it will go off like reverse or neutraql and makes a real loud knocking sound. Its a replacement trans put in recently. So my question is does it sound like the torque convertor? or what are symptoms of the convertor going as I never had one fail on me. Thanks in advance
#5
Member
Thread Starter
Well its fixed now guys thanks for the continuing help for my jeep this site is the best. It turned out to be a combination of the torque cnvertor bolts a little bit loose, the inspection plate a little bent and a few of the bellhousing bolts to mount engine and trans were loose and one on driver side where bracket is was about to fall out. All is well now. Thanks again guys
Trending Topics
#8
Member
Thread Starter
Yeah it was atwo day R&Rwith me and my father and we were up late too many molson xxx for that install.. Would have found my problem out sooner or later when the trans is laying on the ground woopsies
Thread
Thread Starter
Forum
Replies
Last Post
jeefersjeepers
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-20-2023 12:51 PM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
eagle11401
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-10-2015 09:06 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)