Budget boost lift ideas
#16
Old fart with a wrench
I may have spoken too quickly on the driveshaft. I was thinking WJs with the CV shaft up front.
#17
Newbie
Thread Starter
Join Date: Jun 2014
Location: Red Deer, Alberta
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 4.0
#18
Member
Hi. Dave is right, the suspension geometry will change, and not for it's advantage. Additionally if you put V8 springs in the front and front springs in the back, the springs will be to strong for the weight, and the originally little bit uncomfortable ride, going to be even harder.
#20
Newbie
Thread Starter
Join Date: Jun 2014
Location: Red Deer, Alberta
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Grand Cherokee
Engine: 4.0
Nice, no long arm kit eh. Do u have spacers in the rear with the front coils? What all did u have to do in your front end as for track bars etc or is that all stock still
Last edited by DirtyZjGirl; 06-30-2014 at 04:37 PM.
#21
Newbie
Join Date: May 2013
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Grand Cherokee
Engine: 5.2
all 4 spacer were removed for the front to rear.
front is sporting a clayton HD track bar and bracket and the 3.5" RE coils, for the rear i am still running the stock bar with a new mount welded to the D44
let me know if there is anything else, good luck!
Thread
Thread Starter
Forum
Replies
Last Post
xjallseasons
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-29-2015 08:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)