Exhaust Clunking
#1
Junior Member
Thread Starter
Join Date: May 2010
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Grand Cherokee
Engine: 4.7L V8
Exhaust Clunking
I have a flowmaster exhaust installed on my '99 WJ 4.7L. I have noticed lately that there is a ridiculous clanging/banging noise (like metal hitting metal) coming from the right rear. I had a look around and found that the tail pipe has quite a bit of play. The hanger is fine but the rubber bushing feel worn. The noise is really annoying. I don't have access to a welder so any ideas as to how to remedy the situation. I have tried to find a new rubber bushing but can't anywhere from quadratec to rock auto. I can wiggle the stock pipe a good 1-1/2 to 2 inches. On a side note, the lower control arm bushings are all worn out (145k and never changed) but I have installed new monroe sensa-tac shocks a couple days ago. Any help would be good cause I'm fixing to go nuts!!
Thread
Thread Starter
Forum
Replies
Last Post
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
55
08-21-2024 05:22 PM
libengan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
11-06-2015 09:16 AM
MightyMouse8
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
10-08-2015 08:57 AM
Crimmy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-01-2015 06:43 PM
shadowmoses
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-30-2015 01:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)