nick_n_ii

If you have a manual it's easier than you'd think...

Plan-B

found this...
http://www.eriejeeppeople.com/ejpfor...showtopic=1264

nick_n_ii

That works too....

Plan-B

haha yeah but it seems a bit hard

nick_n_ii

Not at all, take your time and relax and it will go over easily. And if you want I can pm you my home # and you can all me if you have any issues...

Plan-B

alright cool. thanks man.
well i hope my dad doesn't get pissed that i'm going to do this! he most likely will though

Plan-B

HELP! CAN'T GET THE LITTLE TABS OUT TO GET THE BUMPER OFF. lol
and i have a stripped screw on the grille i can't get off

nick_n_ii

On those little tabs(or are you talking the little buttons?) if it's the buttons, you push in on the out side and pull the middle... as for the screw, drill off the head, than you should be able to get the rest out with plyers when you pull the grill...

Plan-B

yeah my dad drilled the screw off.
then we decided to just mount some plates in the back and mount some of those big loop things on it.
haha

nick_n_ii

Take pics if you can...

Plan-B

i will when i'm done with it ;]

xtreme velocity

if you can take pics during the process. we would like to see how you have done it.

Plan-B

kk will do.
well i start to describe it.. so far on the back there is already some sort of plate mounted on the left side but not the right. i'm guessing it was part of a tow thing.
so we are going to make another plate, drill some holes in them, and put the looopy things in it.

xtreme velocity

Sounds like a project. But I bet your enjoying it. And you will really enjoy it when you done and see your own work. Still waitin on pics.

nick_n_ii

Remember if your building something you plan to pull on make it 1/2" or thicker..