I need a xfer case guru!!!
#1
Newbie
Thread Starter
Join Date: May 2010
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I need a xfer case guru!!!
I've pulled my xfer case because the VC is bad. I removed the inspection plate on the tail housing that allows access to the snap ring. The snap ring is broken such that I pulled one of the tabs and about 1/4" of the radius right out of the groove so there is no way I can spread it to get it over the bearing.
Any Ideas?????
Any Ideas?????
#3
Newbie
Thread Starter
Join Date: May 2010
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I was able to get the remainder of the snapring out with a pair of long nose vicegrips by clamping on and dragging the snap ring around the groove. The metal of the snap ring was soft enough to bend so I could bend it up and pull it through the inspection hole as I drug it around the bearing. Lucky on that one!!!
Is that snap ring there to keep the bearing from spinning in the houseing? Thats all I can see it will do.
Anyone know where I can order that snap ring online?
Is that snap ring there to keep the bearing from spinning in the houseing? Thats all I can see it will do.
Anyone know where I can order that snap ring online?
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
02-27-2023 03:38 PM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
12-11-2015 11:09 AM
pantallica20@aol.com
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
10-01-2015 02:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)