Keeping bb with suspention lift?
#16
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 29 Likes
on
28 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
for the couple extra bucks id get the 6 then sell the bb and track bar you have now.........http://www.ironrockoffroad.com/Merch..._Code=IR-W6CPK
#17
Originally Posted by alexallen86
Hey me to but not that winch bumper lol good planes I was wondering the same thing until I decided to just go full lift to keep the ride better and if I was gona keep my bb (budget boost for the guy that's asking ^^^*) I'd put the 6.5 on with it and go for 8in and put some 35s on
#19
Originally Posted by freegdr
for the couple extra bucks id get the 6 then sell the bb and track bar you have now.........http://www.ironrockoffroad.com/Merch..._Code=IR-W6CPK
#20
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 29 Likes
on
28 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
you need longer track bar with adjustment to recenter axles by the time you buy a rear one that will work with 6 inch lift assuming the front will work with 6 inch lift it cost less to buy kit then resell what you have now ...imo...
#21
Originally Posted by freegdr
you need longer track bar with adjustment to recenter axles by the time you buy a rear one that will work with 6 inch lift assuming the front will work with 6 inch lift it cost less to buy kit then resell what you have now ...imo...
#23
Originally Posted by freegdr
those kits come with bars ,track bars are different lentghs for different lifts you front would need to b4 2 to 6 inch lift to be reused
#24
Junior Member
Join Date: Mar 2012
Location: Northampton PA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
i dont know about on a wj but on my xj, i run a 3.5" kit with adj. upper and lower control arms front and ajustable lowers on the rear and i also have 2" bb in the front and a 2" add a leaf in the rear, and I had to run adj. track bars front and rear I agree with freegdr, just buy the right kit with all the parts you need from the get go, you end up spending more trying to do it cheap
#26
Originally Posted by freegdr
what lift height is it 4
#28
Senior Member
Join Date: Jan 2010
Location: Mt. Iron, MN
Posts: 704
Likes: 0
Received 1 Like
on
1 Post
Year: 96 Limited ZJ
Model: Grand Cherokee
Engine: 5.2 w/mods
You should be fine with your front trac bar. I would contact IRO via phone and order your kit. See if they can sweeten the deal by subtracting their front trac bar and adding in the rear one as you need that one. If not buy the kit and sell their front trac bar.
#30
Originally Posted by country_boy454
You should be fine with your front trac bar. I would contact IRO via phone and order your kit. See if they can sweeten the deal by subtracting their front trac bar and adding in the rear one as you need that one. If not buy the kit and sell their front trac bar.