91familyxj

For starters sorry if this has been answered but I cant find any info in regards to front only the rear. I have a 96 limited with 5.2 and I got the RE 2" BB and I put it on the front first and when I lowered it down to do the rear the jeep sat just about level. It is just a hair higher in the front. So My question is what is going to happen in the rear? Im ok with a little rake but not to much. Im guessing my front springs are just super worn. Can I put the 2" (well 1.75") in the rear (with extending the post a couple inches) and put a 3" up front? Everything I have read says 3" is to much and not safe but they are all refering to the rear. What about putting one on the front on worn springs? Or next question is should I put the rear in and remove the isolator and just use spacer and add an extra isolator up front. Current front is stock isolator and and RE spacer. Thanks guys

P.s. I know the "right way" is to do true coils but its just a DD and will see little trails and when it does it will be mild stuff.