Main lighting issue..
#31
Newbie
Join Date: Aug 2016
Location: Columbus, Ohio
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: '97
Model: Grand Cherokee
Engine: 4.0 L
Just take your time with the switch repair, its easy. With my not cleaning the board, and it shorting, I lost the heater controls back-lighting. Yea, its worth a little time and aggravation to save over $80.
#32
Member
Thread Starter
Join Date: Oct 2011
Location: Maryland
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
Your right. I am multi tasking on two vehicles right now. And the information center board will have to be soldered if needed though. Im sure their not cheap!
#33
Senior Member
Join Date: Jul 2016
Location: NC
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 4.0
FWIW I just put a new batery in mine and it fixed my issue.Was halfway through taking the dash apart and it hit me, "check the battery stupid!"
#34
Newbie
Join Date: Aug 2016
Location: Columbus, Ohio
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: '97
Model: Grand Cherokee
Engine: 4.0 L
#35
I just recently bought a jeep! Make long story short the WAS starting just fine well..thought they had a gas leak, come to find out the fuel pump wasnt all the way in the gas tank! We have that fixed..no leaks! when i go to take off from a complete stop(red light) it sputters bad and wont acculturate! When i shut ignition all the way off, it takes 5 cranks or i have to sit,and wait eventually itll start! Im starting by putting some sea foam.. possibly an fuel filter! but im wondering why this abs light is on could it be fuses?? Cause i see something about a F20 fuse for ignition and start and heater! And its no concidence my heater dont work! I need help!
#36
Newbie
Join Date: Aug 2016
Location: Columbus, Ohio
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: '97
Model: Grand Cherokee
Engine: 4.0 L
Hoy Aszree! I too am new to Jeep ownership, and finding all kinds of things on my '97 Grand Cherokee that need attention. Yesterday it was the muffler. It sounds like you have several things on your ZJ you should research in the site's archives and post a thread addressing each problem. I needed a little guidance navigating the site. Take your time, and you'll find many will help if the questions are in the right catagory.
#37
Seasoned Member
I have to remove that display below my ashtray to do sodering. I used the search function here and seen that my problem with the rear taillights and coolant sensor warning that are annoying might actually be the broken solder joints on that back of the display acreen..so more soldering ..lol
This is gonna suck way more than the headlight switch. And take it from my experience, it may not fix anything. I was severely upset when I reinstalled the VIC, and still got those messages. My taillight does have a bad connection on one of the 194a side marker built into the taillight. Easiest to just remove the VIC and replace with a switch panel. Lights etc.
If you do get lucky and it works be sure to share.
#38
Seasoned Member
also, I didn't see dave1123 post it. The manual he's talking about is incredible.
Pacificcoastmanuals.com
$7.99 for a 2300 page manual on your Jeep. Its crazy how much info is in there. Everything is a clickable link. So you don't have to scroll to find what you want.
Pacificcoastmanuals.com
$7.99 for a 2300 page manual on your Jeep. Its crazy how much info is in there. Everything is a clickable link. So you don't have to scroll to find what you want.
#39
Member
Thread Starter
Join Date: Oct 2011
Location: Maryland
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
This is gonna suck way more than the headlight switch. And take it from my experience, it may not fix anything. I was severely upset when I reinstalled the VIC, and still got those messages. My taillight does have a bad connection on one of the 194a side marker built into the taillight. Easiest to just remove the VIC and replace with a switch panel. Lights etc.
If you do get lucky and it works be sure to share.
If you do get lucky and it works be sure to share.
I'm still new to this vehicle. Are you saying that we can eliminate that Vic, and replace it with something else instead?