No windows/ door locks/ mirrors power
09-07-2023, 01:50 PM
#1
Newbie
Thread Starter
No windows/ door locks/ mirrors power (solved)
So I was broke down working on my jeep, and some kid stopped to help me, I was busy and only half hear him say he shut off power to my acc. Windows, door locks, and mirrors will not work now. Anyone maybe know what he might have done???
Edit to add, 03 grand Cherokee 4.0
Edit to add, 03 grand Cherokee 4.0
Last edited by MizzJesi; 10-17-2023 at 02:14 PM. Reason: Solved
09-08-2023, 01:02 PM
#2
CF Veteran
This looks like another BCM issue. You and Frank should compare notes (https://www.cherokeeforum.com/f5/win...egrees-270189/). He might even have access to a good BCM for you.
Last edited by Cherryokee; 09-08-2023 at 01:06 PM. Reason: add-on
09-09-2023, 05:33 PM
#3
Newbie
Thread Starter
No I'm sorry but he specifically shut it off. It was working just fine.
Last edited by MizzJesi; 09-09-2023 at 07:34 PM.
09-19-2023, 01:08 AM
#4
Member
Had a BCM issue some time ago, no windows, no A/C, and a few other things. Was able to reset by disconnecting the ground cable from the battery, and then reconnecting the ground cable, everything worked fine after that…
The following users liked this post:
MizzJesi (09-22-2023)
09-22-2023, 04:25 PM
#5
Newbie
Thread Starter
i can't not say for sure tht this was done, so. I will give it a shot. Thank you. But how would he have caused that issue?
09-24-2023, 11:03 PM
#6
Member
Whatever the young fella did, that’s a mystery. My BCM problem was heat related, the battery disconnect reset worked for me. You can turn on an off the ignition switch three times in succession and a fault code might possibly show up on the odometer display, if no fault code, start checking for loose/ dirty connections. Perhaps the guy pulled a fuse or relay from the power distribution box next to the battery, check those…
Last edited by Bearstream; 09-24-2023 at 11:12 PM. Reason: Context correction
The following users liked this post:
MizzJesi (09-25-2023)
09-25-2023, 03:02 AM
#7
Newbie
Thread Starter
Whatever the young fella did, that’s a mystery. My BCM problem was heat related, the battery disconnect reset worked for me. You can turn on an off the ignition switch three times in succession and a fault code might possibly show up on the odometer display, if no fault code, start checking for loose/ dirty connections. Perhaps the guy pulled a fuse or relay from the power distribution box next to the battery, check those…
do you know of possibly an in-line fuse? Coming from power distribution box to firewall? I will check it out tomorrow. Thank you!
Trending Topics
09-27-2023, 05:57 PM
#8
Newbie
Thread Starter
Ok so still no go
Here we go,
I have checked both door wires,they are all good. I have checked internal and external fuses. All are good.
My jeep will now run, but dies. I know that come up as SKIM module, but I'm wondering if after resetting my pcm, for whatever reason the skim is not getting power thanks to what this kid did.
I have checked the engine compartment for and inline fuses, or disconnected plugs and found nothing so far.
Checked under the driver side dash and found nothing unplugged either.
I'm going to order a new BCM tomorrow, and see if maybe he did something to that. Although I seriously doubt it.
I need to know if anyone knows of any other way he could have shut off power to my interior?!?!
I have checked both door wires,they are all good. I have checked internal and external fuses. All are good.
My jeep will now run, but dies. I know that come up as SKIM module, but I'm wondering if after resetting my pcm, for whatever reason the skim is not getting power thanks to what this kid did.
I have checked the engine compartment for and inline fuses, or disconnected plugs and found nothing so far.
Checked under the driver side dash and found nothing unplugged either.
I'm going to order a new BCM tomorrow, and see if maybe he did something to that. Although I seriously doubt it.
I need to know if anyone knows of any other way he could have shut off power to my interior?!?!
10-11-2023, 03:43 PM
#9
Newbie
Thread Starter
Thanks I figured it out!
It was a blown fuse that didn't look bad. I got frustrated and just started replacing fuses and it worked.
The following users liked this post:
Rooch1008 (10-11-2023)
Thread
Thread Starter
Forum
Replies
Last Post
Djbtraxxas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-06-2018 12:52 PM
Mendo1975
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
06-11-2018 03:13 PM
Sudsrat
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
04-05-2016 05:08 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)