Removing power steering pump on a 1995 Jeep Grand Cherokee Limited with 5.6L engine
#1
Newbie
Thread Starter
Join Date: Aug 2018
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Removing power steering pump on a 1995 Jeep Grand Cherokee Limited with 5.6L engine
I am trying to replace the engine in a 1995 Jeep Grand Cherokee Limited 4WD auto transmission with a 5.2 L V-8 engine. I am working on removing the power steering pump and cannot get the last bolt out. It is the one on the top back side of the pump that there doesn't seem to be any way to get any kind of a wrench on that will then turn. No way to get a socket or closed end wrench on it at all. I can get a straight box end wrench on it but then there is no room to turn it - not even a little. It looks like if you could get the reservoir off, you might be able to get to it. But I can't get the clips off with it mounted on the engine. Any ideas would be greatly appreciated.
Last edited by jwrecord13; 08-06-2018 at 08:09 PM. Reason: Wrong engine siaze. It is a 5.2L V-8
#2
Seasoned Member
I am not being a butt. you will probably get a better response in the grand cherokee area of this forum. this is the stock xj section.
good luck,
happy jeepin
texastaz38
good luck,
happy jeepin
texastaz38
Thread
Thread Starter
Forum
Replies
Last Post
jamaicanmecrazy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-07-2015 04:28 PM
smtippin
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
02-04-2010 02:45 AM
sporthorsebreeder
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
07-08-2008 03:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)