Fabrication & builders section. All fabrication posts go here.
XJ/MJ/ZJ/WJ Only projects go here. Questions belong in modified tech.
Old 09-21-2015, 04:41 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: Lighting
Print Wikipost

7x6 headlight Projector Build

Thread Tools
 
Search this Thread
 
Old 01-31-2012 | 09:50 PM
  #121  
preppye's Avatar
Thread Starter
Member
 
Joined: Mar 2009
Posts: 249
Likes: 1
From: Punta Cana , Dominican Republic.
Year: 1988
Model: Cherokee
Engine: 4d56td
Default

yes, those rubber sockets always do that , they are cheap made , and they tend to bend and sometimes they even cause short , so i think you should just leave the halos and put some silicon on the holes where the sockets should be and its going to look nicer without the headache...
Old 01-31-2012 | 10:32 PM
  #122  
Jlk111205's Avatar
Seasoned Member
 
Joined: Nov 2011
Posts: 309
Likes: 0
Default

Nice yea im feelin just the halos Ill disconnect the wiring to the sockets and just leave em plugged till I get some silicone I may have sine. Yea the socket I wired up blew fuses all day :/ it was a head ache. Ill usecthe bulbs for my marker light bulbs lol
Old 02-01-2012 | 08:08 AM
  #123  
preppye's Avatar
Thread Starter
Member
 
Joined: Mar 2009
Posts: 249
Likes: 1
From: Punta Cana , Dominican Republic.
Year: 1988
Model: Cherokee
Engine: 4d56td
Default

im telling you, i went through that already and mine was worst cause the headlights i got had 2 sockets , and it was always a mess up , ended doing what i told you..
Old 02-01-2012 | 08:47 AM
  #124  
Jlk111205's Avatar
Seasoned Member
 
Joined: Nov 2011
Posts: 309
Likes: 0
Default

Yea. Imma lose those bulbs and sockets I dnt have any silicone I dntbthink at the moment so imma just unhook the sockets and take the bulbs out and put just the bulb lights in my marker lights hopefully makin em brighter. Ill tape off the wires to the sockets temporarily till I get some silicobe. Imma reseal the light assemblys anyway cause in muggy weather one fogs up on the inside . But not bad . I apprrciate the advice and tips. Been a real help. This is my first jeep build so . Alot I not used to lol
Old 02-01-2012 | 09:09 AM
  #125  
preppye's Avatar
Thread Starter
Member
 
Joined: Mar 2009
Posts: 249
Likes: 1
From: Punta Cana , Dominican Republic.
Year: 1988
Model: Cherokee
Engine: 4d56td
Default

if you dont have any silicone then use some duct tape or clear tape and tape it sealing the hole , but you cant leave it open cause water and moisture will enter the headlamp , just put some tape over it and that's it...
Old 02-01-2012 | 10:09 AM
  #126  
Jlk111205's Avatar
Seasoned Member
 
Joined: Nov 2011
Posts: 309
Likes: 0
Default

Yea ill seal it up
Old 02-01-2012 | 11:50 AM
  #127  
Jlk111205's Avatar
Seasoned Member
 
Joined: Nov 2011
Posts: 309
Likes: 0
Default

Gottem sealed and hooked up will post pics later
Old 02-01-2012 | 06:17 PM
  #128  
Jlk111205's Avatar
Seasoned Member
 
Joined: Nov 2011
Posts: 309
Likes: 0
Default

7x6 headlight Projector Build-forumrunner_20120201_191612.jpg



7x6 headlight Projector Build-forumrunner_20120201_191637.jpg



7x6 headlight Projector Build-forumrunner_20120201_191700.jpg
Old 02-01-2012 | 06:48 PM
  #129  
preppye's Avatar
Thread Starter
Member
 
Joined: Mar 2009
Posts: 249
Likes: 1
From: Punta Cana , Dominican Republic.
Year: 1988
Model: Cherokee
Engine: 4d56td
Default

nice , you just need to add 55w 4300k hid to the headlight so they can match the halogen and that's it ...
Old 02-01-2012 | 08:37 PM
  #130  
Jlk111205's Avatar
Seasoned Member
 
Joined: Nov 2011
Posts: 309
Likes: 0
Default

Wat mean add a 55w to the headlight? Or replace the main bulb?
Old 02-01-2012 | 08:46 PM
  #131  
Jlk111205's Avatar
Seasoned Member
 
Joined: Nov 2011
Posts: 309
Likes: 0
Default

Ur post confused me lol u mean replace the headlight bulb to match the halo?
Old 02-01-2012 | 08:54 PM
  #132  
XJeepWerks's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 3,869
Likes: 2
From: Allentown, Pa
Year: 1994
Model: Cherokee
Engine: 4.0L HO
Default

Originally Posted by Jlk111205
Wat mean add a 55w to the headlight? Or replace the main bulb?
What he means is to upgrade from the standard 35w hid to 55w and to use a 4300k bulb so it matches the color of your fog lights.
Old 02-01-2012 | 08:54 PM
  #133  
preppye's Avatar
Thread Starter
Member
 
Joined: Mar 2009
Posts: 249
Likes: 1
From: Punta Cana , Dominican Republic.
Year: 1988
Model: Cherokee
Engine: 4d56td
Default

to put some HID xenon bulbs on the headlamp , the ones i use to get the most lumens are the 55watt 4300k HID bulb
Old 02-01-2012 | 08:56 PM
  #134  
Jlk111205's Avatar
Seasoned Member
 
Joined: Nov 2011
Posts: 309
Likes: 0
Default

Ah yea . I was thinkin to replace the bulbs in my fog lights to match the head lights
Old 02-01-2012 | 08:58 PM
  #135  
preppye's Avatar
Thread Starter
Member
 
Joined: Mar 2009
Posts: 249
Likes: 1
From: Punta Cana , Dominican Republic.
Year: 1988
Model: Cherokee
Engine: 4d56td
Default

no way your fogs are lot more bright that the ones on the headlight i believe that the ones you are using should be 8000k , you should change those to get more lighting ..


Quick Reply: 7x6 headlight Projector Build



All times are GMT -5. The time now is 10:34 AM.