Fender Trimming
06-29-2010 | 01:50 PM
#16
Member
Joined: Feb 2010
Posts: 118
Likes: 0
From: Strongsville, Ohio
Year: 1992
Model: Cherokee
Engine: 4.0 l
The sport kings were fine.
No to reuse the flares. To reuse the flares you would have to watch how much you cut off.
No to reuse the flares. To reuse the flares you would have to watch how much you cut off.
06-29-2010 | 08:50 PM
#18
Seasoned Member
Joined: Sep 2009
Posts: 373
Likes: 0
From: Everett, WA
Year: 1990
Model: Cherokee
Engine: 4.0l
06-29-2010 | 08:52 PM
#19
CF Veteran
Joined: Jun 2010
Posts: 2,117
Likes: 3
From: Ohio
Year: 1998
Model: Cherokee
Engine: 4.0 stock
07-04-2010 | 03:09 AM
#20
Seasoned Member
Joined: Sep 2009
Posts: 373
Likes: 0
From: Everett, WA
Year: 1990
Model: Cherokee
Engine: 4.0l
Just lettin everybody know I did a write-up on tubbing out and stretching the rear fenders, it just needs to be approved, then its in the write-up section
07-04-2010 | 04:37 PM
#21
Member
Joined: Apr 2010
Posts: 174
Likes: 0
From: Minnesota
Year: 1999
Model: Cherokee
Engine: 2.5L MPI (Throttle Body Spacer, Intake)
If you go on the Bushwacker site, and look at some of the directions for installing their fenders, (at least the flat style), they have some good measurments on where to cut. and what needs to be bent in.
Thread
Thread Starter
Forum
Replies
Last Post
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-29-2015 08:43 PM
Sivadon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-24-2015 07:31 PM
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)