Homebrew Jeep Mods
#1636
CF Veteran
Join Date: Jun 2011
Location: Nor-Cal
Posts: 2,858
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: The venerable 4.0
Originally Posted by Jeepjunky
thats a true chop top lol i like the windshield, its different to see that on a xj
#1637
Junior Member
Join Date: Aug 2011
Location: San Diego
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: i6 4.0
haha thank you guys. i cant take credit for the chop top or the windsheild, PO put alot of work into this rig.. i like it cause its different. and yes windsheild folds down
#1639
CF Veteran
Join Date: Jan 2011
Location: Missouri
Posts: 2,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0HO
the axle side track bar mount is the stock mount with a 1/4" plate welded and laid over it, then the ugly part is that it has been grinded out for more clearance
that frame side tb mount looks better in person
that being said I did have my buddy's dad check it out, he has been a welder/fabricator for over 35 years, he says they are fine, and more importantly, safe...
but he also made a few recommendations:
-stop using FLUX CORE... it is ugly and in the end it is expensive... however it is just as strong as gas, BUT it tends to splatter
-add a support bar that runs from the frame side TB mount to the other side of the frame
-add more gussets... no reason not too, as long as they clear every thing
-he also says I should try running just a hair more wire speed... not much but just a little more
Last edited by ericfx1984; 09-02-2011 at 07:34 AM.
#1640
Member
Join Date: Apr 2011
Location: Duluth GA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
thanks for the concern... I know they are not amazing welds, BUT they do look a lot better in person
the axle side track bar mount is the stock mount with a 1/4" plate welded and laid over it, then the ugly part is that it has been grinded out for more clearance
that frame side tb mount looks better in person
that being said I did have my buddy's dad check it out, he has been a welder/fabricator for over 35 years, he says they are fine, and more importantly, safe...
but he also made a few recommendations:
-stop using FLUX CORE... it is ugly and in the end it is expensive... however it is just as strong as gas, BUT it tends to splatter
-add a support bar that runs from the frame side TB mount to the other side of the frame
-add more gussets... no reason not too, as long as they clear every thing
-he also says I should try running just a hair more wire speed... not much but just a little more
the axle side track bar mount is the stock mount with a 1/4" plate welded and laid over it, then the ugly part is that it has been grinded out for more clearance
that frame side tb mount looks better in person
that being said I did have my buddy's dad check it out, he has been a welder/fabricator for over 35 years, he says they are fine, and more importantly, safe...
but he also made a few recommendations:
-stop using FLUX CORE... it is ugly and in the end it is expensive... however it is just as strong as gas, BUT it tends to splatter
-add a support bar that runs from the frame side TB mount to the other side of the frame
-add more gussets... no reason not too, as long as they clear every thing
-he also says I should try running just a hair more wire speed... not much but just a little more
#1642
CF Veteran
Join Date: Jan 2011
Location: Missouri
Posts: 2,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0HO
first time I had it out after doing all this work I was pulling over on the highway every few miles to check everything... it was a riot to watch
#1646
☠ CF Sheriff ☠
#1647
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
I just like the convenience. My old one was tethered, and I'm used to letting go when I unscrew it, so I keep dropping it at the pump lol. I think the hollow interior of the handle is separated from the rest, but if I did break the seal, I guess I'll have to buy another one. Live and learn.
#1648
CF Veteran
Join Date: Jun 2011
Location: S.E. Tx
Posts: 1,845
Likes: 0
Received 2 Likes
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0 I6 firepower ignition, cat-back w/ magnaflow muffler, poweraid tb spacer, optima blue top
By the way, the outlined area was designed to hold the cap while filling.
#1649
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Originally Posted by xj wheeler
By the way, the outlined area was designed to hold the cap while filling.
#1650
CF Veteran
Join Date: Jun 2011
Location: Colorado
Posts: 2,448
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0