Homebrew Jeep Mods
#1877
Newbie
Join Date: Oct 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
Ok so after reading this for a while finally decided to add my little mods.
And sorry for pics quality.. had to use the phone.
Ok so..
We fabbed the A-shaped piece of the front bumper(rest of the bumper was made and modified by the last owner). Oh and also painted fenders black.
Replaced cig lighter with winch switch (has a blue backlight to see it in the dark ) + added a few cig lighters to keep things running. The black button under the winch switch is my starter button
These 2 switches are for roof lights.. left for front and right for rear lights. Green led-s to annoy/let me know the lights are on
Also made a little lid for the rear panel hole + going to add another cig lighter there.
Nothing fancy or big but a mod is a mod right?
And sorry for pics quality.. had to use the phone.
Ok so..
We fabbed the A-shaped piece of the front bumper(rest of the bumper was made and modified by the last owner). Oh and also painted fenders black.
Replaced cig lighter with winch switch (has a blue backlight to see it in the dark ) + added a few cig lighters to keep things running. The black button under the winch switch is my starter button
These 2 switches are for roof lights.. left for front and right for rear lights. Green led-s to annoy/let me know the lights are on
Also made a little lid for the rear panel hole + going to add another cig lighter there.
Nothing fancy or big but a mod is a mod right?
#1878
Senior Member
Join Date: Mar 2010
Location: Hampton, Virginia
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: none other
its them little things that goes along way. especially all them cig lighter holes. i need to do that myself. my phone charger, my wifes, kidos dve player....hmm good idea there. are they all ran off the same fuse/hot wire? or all seperate?
#1879
Newbie
Join Date: Oct 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 HO
At the moment they are all from the original wire.. Have'nt tested yet. Might have to run all seperate tho.
#1881
Junior Member
Join Date: Jun 2011
Location: Indiana
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 2.5L 4-cylinder
hurley, Im so doing the same when I get an inverter. That is cool. What Ive done are very minor things so far but I did them and that's what's important. I got the idea for moving the vacuum tank from someone here on the forums. Unfortunatly I don't remember their name but if you search "vacuum tank" or similar I'm sure you'll find them, so props to that individual for the cool idea. The hi-lift mounts are simple. I brushed, primed and painted them flat black. I used self-tapping screws to secure them to the bed. What's on top or whats covering the bed is some very cheap foam/rubber padding. ($17 for a pack of 4 squares each measuring 2x2ft). I trimmed them to fit. Wasn't too hard. It cuts down on the fule pump hiss a little and also prevents all my stuff from sliding around. The nuts are pretty funny, I think. Went to Tacoma Screw and paid $12 a piece for those and they aren't galvanized or zinc or anything. Just the low end type. I wire brushed them, put on 5 coats of primer and 2 coats of what I thought was outdoor silver. It wasn't. So after more wire brushing and 2 more coats of primer and 2 coats of a Krylon external silver coating they are done
#1883
Junior Member
Join Date: Sep 2011
Location: ocala fl
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
i have the same setup on mine it doesnt change the temp
#1884
Junior Member
Join Date: Sep 2011
Location: ocala fl
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
#1886
CF Veteran
Join Date: Sep 2010
Location: Warsaw, IN
Posts: 2,844
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
#1889
CF Veteran
Join Date: Jun 2010
Location: Hayward, CA
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
#1890
::Regional Moderator::
Join Date: Aug 2011
Location: Jacksonville, NC
Posts: 4,742
Likes: 0
Received 10 Likes
on
6 Posts
Year: 1993
Model: Cherokee
Engine: I6 4.0L HO
lol yess lol many of times ive said i wanted to dive into my xj.....but that gota be off a ramp parrlell to the window off a slip slide