Homebrew Jeep Mods
10-08-2011, 11:22 PM
#1966
Senior Member
Join Date: May 2011
Location: Newman, Lake WA
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 I6 cold air
Originally Posted by 94nIT
I cut the brackets off a set of front seats. (below the slide rails) Then wielded tabs on and bolted in place of the rear bench.
10-09-2011, 01:56 AM
#1967
Newbie
Join Date: Oct 2011
Location: tx
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
roll cage
has any one bought a bolt in roll cage for there jeep? if so are they easy to install? take up a lot of room? in other works are they worth the money? or should i try to build my own?
thanks mal.
thanks mal.
10-09-2011, 09:41 AM
#1970
Member
Join Date: Aug 2011
Location: southern ohio
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Originally Posted by NewKindOfClown
It personalizes it, and many of them are functional even if they aren't pretty. Not everyone has the same priorities.
My fenders? Just an angle grinder, finished off with sandpaper on the lips to paint so it won't rust.
My fenders? Just an angle grinder, finished off with sandpaper on the lips to paint so it won't rust.
10-09-2011, 11:17 AM
#1972
Senior Member
Join Date: May 2011
Location: Newman, Lake WA
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 I6 cold air
Originally Posted by courtney42
GAHH really! my ac is out cause i need a new coil but i tried the fan and it would only blow out the winshield defrost vents. Is the ball bad if the fan wont blow through the other vents ? How much are these vacuum *****? Cheap?
10-09-2011, 02:25 PM
#1973
Junior Member
Join Date: Sep 2011
Location: Texas
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Year: 96
Model: Cherokee
Engine: I6
10-09-2011, 04:58 PM
#1975
Moderator of Jeeps
Join Date: Jul 2011
Location: Frederick, MD from Cleveland, OH
Posts: 21,029
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Originally Posted by courtney42
pics please !!!!!!!!!!
10-09-2011, 05:51 PM
#1976
Originally Posted by NewKindOfClown
Just moved mine today. Unscrew it from bumper, pull the hose from the ball, pull the hose back up into the engine bay, place it, reconnect it. I put mine between the battery and fender with one screw in a hole that was already there.
10-09-2011, 09:31 PM
#1978
Senior Member
Join Date: May 2011
Location: Newman, Lake WA
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 I6 cold air
Originally Posted by James P
That exactly where I put mine. Plenty of room there and no drilling ..
10-09-2011, 10:52 PM
#1980
Originally Posted by Slick761
I wanna see pics. Mine was so easy and so clean. I want to see what you guys did.