Homebrew Jeep Mods
#62
Newbie
Join Date: Aug 2009
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0
about taken headliner out,I will post pictures later but i took off on my headliner by peeling it off and leaving foam,Then taking a wet dry vac and i lightly scraped with vac tip on the foam and it sucked it up leaving the fiber board which looks alot like a drum head texture.Looks cool and i kept my molded speakers in the rear.I have an 01 and i dont know how much they have changed over the years.ill post pics tomorrow.
#63
Seasoned Member
Thread Starter
Join Date: Apr 2009
Location: Appleton Wisconsin
Posts: 457
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0
okay well i have another one to add. No pictures yet. I just installed a hydr. hood lift that came off of an Explorer. this one was almost a very expensive mod. i installed the lift on to the hood cross supports and under the pressure of putting the hood down it ripped out and almost took out my brake fluid bottle. But instead it just dented my hood...... Well I remounted it an did some reinforcing and got it to work really well. i'll post pics later
#64
Seasoned Member
Thread Starter
Join Date: Apr 2009
Location: Appleton Wisconsin
Posts: 457
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0
here they are. you can see the old attachment point... haven't got the time or patience to take it off a 1/4 turn at a time right now. Oh and i also went out and got some 10awg wire to replace stock baja wires. Are the stock roof bars steel?? if they are i might be able to make an easier mounting and ground system.
Last edited by kitsapfreerider; 08-19-2009 at 03:20 PM.
#66
Seasoned Member
Thread Starter
Join Date: Apr 2009
Location: Appleton Wisconsin
Posts: 457
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0
Well thanks to Troth I finally got my Baja light upgrade finished. They are noticeable brighter. Only took 2 hours to remove old wire and install new wire. total cost about $30
40 feet of 10gauge wire is what this mod took. along with assorted splices fuses and connectors. I also added another ground strap from the battery to the frame.
40 feet of 10gauge wire is what this mod took. along with assorted splices fuses and connectors. I also added another ground strap from the battery to the frame.
#68
In no particular order.
Frame stiffeners.
Long Arms
Replaced Rockers with built in SliderZ
Flat Fenders
My old Bumper/tire carrier with a D44 hub as a spindle. (Yes it locks).
Battery relocation and OBA.
That's enough I guess.
Frame stiffeners.
Long Arms
Replaced Rockers with built in SliderZ
Flat Fenders
My old Bumper/tire carrier with a D44 hub as a spindle. (Yes it locks).
Battery relocation and OBA.
That's enough I guess.
The following users liked this post:
CaptRocky (10-25-2020)
#70
Junior Member
Join Date: Aug 2009
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.5L
nw-xj-scott, hey man love the bike rack mod! want to do that and free up some cargo space until i can afford a rear bumper with carrier, kinda sux being a broke college student! what kinda rack was that? how did u do the mod exactly?
Last edited by pioneer; 08-25-2009 at 11:39 PM.
#71
#75
Member
Join Date: Sep 2008
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L high output