Homebrew Jeep Mods
#1261
☠ CF Sheriff ☠
#1264
CF Veteran
Join Date: Jan 2011
Location: Virginia
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Hey everybody I don't know if anybody else has tried this but I helped my buddy with his 98 cherokee sport get rid of his stupid inerfender windshield washer bottle.
What we did was use a Windshield washer bottle from a V8 ZJ, all the plugs that go to both the motors and for the sensor are the same. Its a direct bolt in procedure just screw it to the fender, plug everything up and your good to go. Now no more washer bottle in the fender. Here's some pictures of the finished product.
What we did was use a Windshield washer bottle from a V8 ZJ, all the plugs that go to both the motors and for the sensor are the same. Its a direct bolt in procedure just screw it to the fender, plug everything up and your good to go. Now no more washer bottle in the fender. Here's some pictures of the finished product.
#1265
CF Veteran
Join Date: Sep 2010
Location: Warsaw, IN
Posts: 2,844
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
Hey everybody I don't know if anybody else has tried this but I helped my buddy with his 98 cherokee sport get rid of his stupid inerfender windshield washer bottle.
What we did was use a Windshield washer bottle from a V8 ZJ, all the plugs that go to both the motors and for the sensor are the same. Its a direct bolt in procedure just screw it to the fender, plug everything up and your good to go. Now no more washer bottle in the fender. Here's some pictures of the finished product.
What we did was use a Windshield washer bottle from a V8 ZJ, all the plugs that go to both the motors and for the sensor are the same. Its a direct bolt in procedure just screw it to the fender, plug everything up and your good to go. Now no more washer bottle in the fender. Here's some pictures of the finished product.
That's sweet.
#1267
CF Veteran
Join Date: Jan 2010
Location: WI
Posts: 1,506
Likes: 0
Received 2 Likes
on
2 Posts
Year: '99
Model: Cherokee
Engine: 4.o
IMO a cowl snorkel is your best/cheapest option. Check out my design (this design won't work if you have ABS.).
https://www.cherokeeforum.com/f67/my...snorkle-67919/
https://www.cherokeeforum.com/f67/my...snorkle-67919/
Mine cost $40 and I am fine with that. That and I have already had my cowl under water.
#1268
CF Veteran
Join Date: Jan 2011
Location: Virginia
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Ya that's what we were going to use, and just swap the motors and sensor over, but the ZJ bottle just fit a whole lot better in that spot and the motor and sensor plugs are all identical so they just plug right up. I think the ZJ bottle is shaped more for the driver side fender unlike the older XJ bottles are shaped to fit over on the passenger side fender.
#1271
Senior Member
Join Date: Mar 2011
Location: NEPA
Posts: 613
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L HO
Originally Posted by Norma Jeane XJ
Thanks, I used 3/4 square tubing. Also heres what I drew up.
#1272
CF Veteran
Join Date: Jan 2009
Location: Utardiland
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
#1273
Senior Member
Join Date: Mar 2011
Location: NEPA
Posts: 613
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L HO
Made the rack last night. Took about 4 hrs. What do you guys think? Don't mind the oil that I'm taking to recycle and the old rotors that were laying in the garage I'm getting rid of.
#1274
Seasoned Member
Join Date: Oct 2010
Location: Crystal Lake, IL
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Originally Posted by jmaxj
move it up on top, its well worth it, i fried two before i decided to move it up and not worry about it.
#1275
Seasoned Member
Join Date: Oct 2010
Location: Crystal Lake, IL
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6
Originally Posted by jeepin_xj
Made the rack last night. Took about 4 hrs. What do you guys think? Don't mind the oil that I'm taking to recycle and the old rotors that were laying in the garage I'm getting rid of.