Homebrew Jeep Mods
#1397
Senior Member
Join Date: Dec 2009
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: i6 4.0L High Output
I thought I was the only one who did this! I do it at red lights all the time just to pass the time. It's hilarious watching the people crack up in the car behind me. I think it's funny because it looks like my XJ is peeing on their little honda
#1398
Member
Join Date: Dec 2010
Location: Bozeman, MT
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I-6
#1401
Former Sponsor
Join Date: Jul 2010
Location: Lyons, Colorado
Posts: 1,022
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
Originally Posted by Gstomp
I've posted this before as well, but I Raptor lined the lower half and primed the top half and roof. I will never use another bedliner again since I found them. Next I'm trimming up my front fenders and starting a few other things.
#1406
Member
Join Date: Apr 2011
Location: Duluth GA
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Here are a few of mine. There is no way I am going to get anywhere close to getting all mine into this post but I will run a few highlights
Ghetto Cowl Hood (helps my engine run a lil cooler, both on the highway, up and down hills, and crawlin on trails) I put 3/4" spacers and longer bolts in hte hood
Tablet holder - Plugs into my stereo for tunes and I have internet on it.
Cut and rolled fenders
This one is not pretty, but functional. My wire harness melted to my head. I cut out the fused wire block and patched the bad wires. Then made a bracket that bolted the the head bolts and raised the harness away from the heat.
And my favorite I moved the sound bar I got from a buddy up front so I can hear when I have the tube doors in.
There are a crap load more. I just am not good at documenting them as I do them.
I have the Aux fan on a relay so that I control when it turns on. I also have those expensive rear lights that are posted about 30 pages back. I welded 3/16 tabs onto them to hold them better to the truck. I made a CB antennae bracket, that is bolted to on of the lights. I moved the vacuum ball to up inside the bumper.
Have switched LED reverse lights in place of the stock ones. I can turn them on whenever, even when I am being tailgated. LED Tractor brake/running lights, 600 lumen LED driving lights, I removed the restriction out of the air box. IDK there is way more. I will try to update this when I get the list together.
Future things include rear disks, cowl intake, and I think I used all my memory already. I have a massive list of things I am planning to do still. I have only had this jeep 3 months.
Here is them LED Lights. These are stupid bright.
Ghetto Cowl Hood (helps my engine run a lil cooler, both on the highway, up and down hills, and crawlin on trails) I put 3/4" spacers and longer bolts in hte hood
Tablet holder - Plugs into my stereo for tunes and I have internet on it.
Cut and rolled fenders
This one is not pretty, but functional. My wire harness melted to my head. I cut out the fused wire block and patched the bad wires. Then made a bracket that bolted the the head bolts and raised the harness away from the heat.
And my favorite I moved the sound bar I got from a buddy up front so I can hear when I have the tube doors in.
There are a crap load more. I just am not good at documenting them as I do them.
I have the Aux fan on a relay so that I control when it turns on. I also have those expensive rear lights that are posted about 30 pages back. I welded 3/16 tabs onto them to hold them better to the truck. I made a CB antennae bracket, that is bolted to on of the lights. I moved the vacuum ball to up inside the bumper.
Have switched LED reverse lights in place of the stock ones. I can turn them on whenever, even when I am being tailgated. LED Tractor brake/running lights, 600 lumen LED driving lights, I removed the restriction out of the air box. IDK there is way more. I will try to update this when I get the list together.
Future things include rear disks, cowl intake, and I think I used all my memory already. I have a massive list of things I am planning to do still. I have only had this jeep 3 months.
Here is them LED Lights. These are stupid bright.
#1407
☠ CF Sheriff ☠
ESPECIALLY since you used washers instead of solid spacers, and you used grade 5 hardware. Those bolts are not meant to take the moment forces that a collision will now apply to them. This is a recipe for disaster.
Last edited by dukie564; 08-11-2011 at 02:32 PM.