painted trim and cut fenders
#1
Thread Starter
Member
Joined: Jun 2011
Posts: 182
Likes: 0
From: robbinsville NJ
Year: 1995
Model: Cherokee
Engine: 4.0 inline 6
painted trim and cut fenders
so today i painted my side skirts, flares, bumpers and grill and i used a metallic semi-gloss black spray paint. i also cut my flares to be flush with the bumper i just wanted to show you guys some pics. thanks guys.
#4
Thread Starter
Member
Joined: Jun 2011
Posts: 182
Likes: 0
From: robbinsville NJ
Year: 1995
Model: Cherokee
Engine: 4.0 inline 6
i used 2 and 1/2 cans of rustoleum semi gloss (kind of flat) metallic black about $6 a can lol. all i did was tape everything off wet sanded lightly and cleaned everything well with simple green. then wiped everything down and painted. it took me about 3 hours by myself.
Trending Topics
#14
Member
Joined: Jan 2010
Posts: 244
Likes: 0
From: alpharetta,ga
Year: 1996
Model: Cherokee
Engine: 4.0 inline 6
nice im about to do the same on my jeep... so all you did was
1. mask off
2.wet sand
3.simple green
4 paint
nice. im going to do that to mine just debating if i was to aresol bedliner instead of semi gloss..
p.s. how many tints did you do on your tails. i did the same as you but did 3 tints and 4 tints of clear.. look good.
1. mask off
2.wet sand
3.simple green
4 paint
nice. im going to do that to mine just debating if i was to aresol bedliner instead of semi gloss..
p.s. how many tints did you do on your tails. i did the same as you but did 3 tints and 4 tints of clear.. look good.
#15
Thread Starter
Member
Joined: Jun 2011
Posts: 182
Likes: 0
From: robbinsville NJ
Year: 1995
Model: Cherokee
Engine: 4.0 inline 6
yea all i did was sand, tape it off and clean. i like how the semi gloss came out, i wanted to bed line to but im glad i did this. my tail lights dont even have a clear coat on them its just 2 coats of vht nightshade but i also wet sanded very well.
Thread
Thread Starter
Forum
Replies
Last Post
almostamos
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-14-2015 02:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)