Welding thread!!!!
#886
Newbie
Join Date: Oct 2013
Location: Near Billings Montana
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 95
Model: Grand Cherokee
[QUOTE=caged;3037841]i have a really nice 140a lincoln 110v welder. it's the 140c from a welding shop and i wouldn't use it for anything more than welding up exhaust and body panels.
I'm curious- do you use flux core or a dual-shield type wire in the 140?
I've used Esab Dual Shield in a Hobart 140 with excellant results up to 3/16", and I wouldn't be afraid to go up to 1/4" with some preheating.
I'm not a fan of FCAW, I'd rather just stick weld, but adding Co2 is a game changer.
I'm curious- do you use flux core or a dual-shield type wire in the 140?
I've used Esab Dual Shield in a Hobart 140 with excellant results up to 3/16", and I wouldn't be afraid to go up to 1/4" with some preheating.
I'm not a fan of FCAW, I'd rather just stick weld, but adding Co2 is a game changer.
#887
CF Veteran
i run 75/25 gas, so solid wire for me in both the 140 and the 210.
i would weld 3/16 if it wasn't a safety structural bead and maybe 1/4 inch if it is just a welding table or something like that, but definitely not a bumper or suspension part with the 140.
but my 210 fabricator, i will burn 1/4 inch all day long.
i would weld 3/16 if it wasn't a safety structural bead and maybe 1/4 inch if it is just a welding table or something like that, but definitely not a bumper or suspension part with the 140.
but my 210 fabricator, i will burn 1/4 inch all day long.
#889
CF Veteran
that's a friggin nice machine. i used to have the older version of that one. kinda wish i kept it.
#890
No, I don't lick fish.
I don't have a ton of experience with FCAW, but preheating the parts will greatly increase the penetration. Also, multiple passes may be needed but each pass needs to be of good quality- in other words no overlap, proper penetration, etc. If you have spots with overlap, don't be afraid to take a grinder to it so the next pass can dig in fully.
As for wire, I've used Lincoln wire professionally and had good results.
Another choice would be ESAB Coreshield 11.
Lastly, to be a really good welder requires a ton of practice so don't be afraid to burn wire on scrap pieces BEFORE you dive into your Jeep projects!
Hope this helps, shoot me a PM if you have any other questions!
Good luck, and let us know how it turns out!
Ron
As for wire, I've used Lincoln wire professionally and had good results.
Another choice would be ESAB Coreshield 11.
Lastly, to be a really good welder requires a ton of practice so don't be afraid to burn wire on scrap pieces BEFORE you dive into your Jeep projects!
Hope this helps, shoot me a PM if you have any other questions!
Good luck, and let us know how it turns out!
Ron
#891
Newbie
Join Date: Oct 2013
Location: Near Billings Montana
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 95
Model: Grand Cherokee
Bass, have got started burning wire yet?
I forgot to mention that with a very small welder like that, you'll struggle to get even 1/8" penetration so you'll need to bevel and preheat pretty much everything.
Good luck!
I forgot to mention that with a very small welder like that, you'll struggle to get even 1/8" penetration so you'll need to bevel and preheat pretty much everything.
Good luck!
#892
Junior Member
Join Date: Dec 2014
Location: rockinham VT
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: stock I6
#893
No, I don't lick fish.
This shot is after filing the crap out of the welds on the side. Which is unfortunate because the welds on the sides looked the best and I forgot to snap pictures of them before I started filing them down (I say filing and not grinding because well... that's all I have right now - a metal file). I didn't take into account about the clearance of the frame channel and the tongue when I cut the plate, so my beads wound up being to thick to fit.
Painted and finished product.
#894
Newbie
Join Date: Oct 2013
Location: Near Billings Montana
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 95
Model: Grand Cherokee
Oh yeah. I've done a little practicing on it with some thinner stuff - sorry no pics of that... was too ashamed lol. But I did weld a 1/4" plate to my trailer tongue to act as a spacer for the tilt function on it... not the prettiest welds, but for what purpose the spacer is there, it's there for the long haul...
Looks good!
#895
No, I don't lick fish.
#897
No where in any welding code book does it say anything about pretty welds or ugly welds. It is the fusion of the filler material and the base metal that matter. Just my 2 cents.
#899
Seasoned Member
Join Date: Nov 2011
Location: Co
Posts: 343
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Sure there is. The wording may be a little different however (lack of fusion, undercut, cold...). Visual inspection is always the first step for a weld inspector.
Last edited by Boostwerks.com; 03-10-2015 at 10:30 PM.
#900
Newbie
Join Date: Oct 2013
Location: Near Billings Montana
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 95
Model: Grand Cherokee
[QUOTE=TheCK4x4;3051269]No but there are standards to meet.[/QUOTE
There's a saying in the motorcycle world that kind of applies here.
"Chrome won't get you home"- Neither will pretty welds, if the beauty is only on the surface- NOT penetrating deep.
The best welds are those that hold, anything beyond that is just window dressing.
Believe me, Bass, even the best welders don't always lay down perfect looking beads.
There's a saying in the motorcycle world that kind of applies here.
"Chrome won't get you home"- Neither will pretty welds, if the beauty is only on the surface- NOT penetrating deep.
The best welds are those that hold, anything beyond that is just window dressing.
Believe me, Bass, even the best welders don't always lay down perfect looking beads.