I say go with the BB cause you have it already, then when you get bored with the 31's all you will need to do is trim and throw some 33's on it and it will look just like your last rig

the BB wont mess with the drive train to much right?

 

I had a RE 2.5" Long AAL on my last Jeep and I needed a t-case drop. You could tell the front axle was shifted over a tad if you paid attention to it. It seemed to drive okay though.

 

You must not be planning on flexing? A 2' BB Wont flex 33's especially not trimmed. My xj rubs 33's with a 3.5 and trimmedto the guilds

 

I'm only responding with a .....

 

Hey dude- you should really do a right up on your hood pins. Ill bet im not the only one with broken ****ing hood parts.

 

Damn, I never thought of it.

 

Hood Pin Write-up

https://www.cherokeeforum.com/f59/ho...75/#post310949

 

The rain decided to hold off for a little bit, so I mounted up the front flares. I used some 3M molding tape from Auto Zone. I used a double layer of the tape and stuck it on. I ran a bead of black silicone to make things look a little better. I think I'm going to re-cut the rear part of the flare a bit more for a touch more clearance for the rear of the tire and looks. Overall, I like the look of it. The passenger side looks a bit off, but it's because the wheels aren't exactly pointed straight.

 

Nice tires! are you happy with yours?

 

looks good, so ya went with just trimming

 

They haven't seen pavement, much less offroad yet. I've been tinkering with it and I just use the wife's car if I need to go somewhere.

Thanks. If all goes well, I'll put on my 2" BB next week or weekend.

 

2 xs. I wouldnt go over a curb, you might rub.

 

You guys just kill me.

 

I dont think any one has seen your last rig

 

You are probably right. I'm just trying to be nice about it and not debate it. Plus, I still have the rear sway bar on. If it rubs anywhere, it will be on the rear bumper end cap.