"Because i can"
#21
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
i was parked at walmart and when i came out there was a truck with the nutz on it so i grabbed some painters tape that was in my truck and a black marker wrote "kick me" and slapped it on em
i thought it was funny. had a pick on my old phone but this was about 3 yrs ago so its long gone
any way back on topic you can do the hillbilly hood scoop
i usually say cause i can when people ask about it
#22
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
i was parked at walmart and when i came out there was a truck with the nutz on it so i grabbed some painters tape that was in my truck and a black marker wrote "kick me" and slapped it on em
i thought it was funny. had a pick on my old phone but this was about 3 yrs ago so its long gone
any way back on topic you can do the hillbilly hood scoop
i usually say cause i can when people ask about it
i thought it was funny. had a pick on my old phone but this was about 3 yrs ago so its long gone
any way back on topic you can do the hillbilly hood scoop
i usually say cause i can when people ask about it
#23
Thread Starter
Junior Member
Joined: Jun 2010
Posts: 61
Likes: 0
From: Dingmans Ferry, PA
Year: 1995
Model: Cherokee
Engine: 4.0 High Output
#25
CF Veteran
Joined: Feb 2010
Posts: 2,004
Likes: 40
From: corpus christi, texas
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0 I6
the cheap way is to get longer bolts and use some larger nuts as spacers. i guess the hard way would be to get someone to make an aluminum block that actually moves the hood into alignment with the latch and lifts it.
alot of aircooled vw guys have stand off deck lids on the back. i know i did my karmann ghia with 3 nuts on each side on the hinges for more airflow
#26
CF Veteran
Joined: Mar 2010
Posts: 1,275
Likes: 0
From: Alexander City, alabama
Year: 1996
Model: Cherokee
Engine: 4.0 HO
#27
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
On mine it runs about 10* cooler and on the trail it runs normal 210*
i went to home depot and got a piece of 1" square tube, measure center to center of the bolt holes mark and drill cut to length and get some bolts 1" longer than stock and stick them in there
pretty much the same process as a T-case drop
#28
Senior Member
Joined: Jul 2010
Posts: 620
Likes: 0
From: Clover, S.C.
Year: 1998
Model: Cherokee
Engine: 4.0L
#30
Senior Member
Joined: Dec 2009
Posts: 598
Likes: 0
From: Southeast Michigan
Year: 2000
Model: Cherokee
Engine: i-6 4.0
haha thats going in my sig, ive actually seen a truck driving around like that, but "cheap ball sacks" made me laugh, might just be the hour it currently is