Bed lined my roof
#1
Thread Starter
Seasoned Member
Joined: May 2010
Posts: 271
Likes: 0
From: Ypsilanti, MI
Year: 2001
Model: Cherokee
Engine: 4.0
Bed lined my roof
ok my roof had some defective paint or something and i decided to bed line it after seeing how some of you had done. the metal was rusted bad so i got out my angle grinder and wire wheel and started at it. it took me 4.5 hours and my arms were ready to fall off but this is what it looked like..
then because the metal didn't look so good i used some rust killer primer on the bare metal after i taped everything off.
Attachment 48709
then it was time for the Duplicolor bedliner. had to stir it for about 30 min. to get it properly mixed. then i applied 2 coats about 2 hours apart. here it is, I still have some touch up to do but that won't take long.
then because the metal didn't look so good i used some rust killer primer on the bare metal after i taped everything off.
Attachment 48709
then it was time for the Duplicolor bedliner. had to stir it for about 30 min. to get it properly mixed. then i applied 2 coats about 2 hours apart. here it is, I still have some touch up to do but that won't take long.
#4
May have been better off with the rattle can stuff, I think it looks nicer even though its not as tough (doesnt really need to be tough on the roof). nice work though, i bet that was a pain in the butt to get done
#6
Thread Starter
Seasoned Member
Joined: May 2010
Posts: 271
Likes: 0
From: Ypsilanti, MI
Year: 2001
Model: Cherokee
Engine: 4.0
Thanks and the finish is gritty and hard. i just realized that the photo is after the first application. i did one more layer. i will have to post that after the touch up
Trending Topics
#8
Thread Starter
Seasoned Member
Joined: May 2010
Posts: 271
Likes: 0
From: Ypsilanti, MI
Year: 2001
Model: Cherokee
Engine: 4.0
#10
I'm doing this sometime this summer, my roof has all these little circles and you can tell there is rust underneath...
Im thinking just grind/sand, prime and then roll it on and it shouldn't be too obvious on my purple xj
It should hold up good if i throw a kayak up there sometime lol
Im thinking just grind/sand, prime and then roll it on and it shouldn't be too obvious on my purple xj
It should hold up good if i throw a kayak up there sometime lol
#13
Thread Starter
Seasoned Member
Joined: May 2010
Posts: 271
Likes: 0
From: Ypsilanti, MI
Year: 2001
Model: Cherokee
Engine: 4.0
#15
Thread Starter
Seasoned Member
Joined: May 2010
Posts: 271
Likes: 0
From: Ypsilanti, MI
Year: 2001
Model: Cherokee
Engine: 4.0