And keep your plastic bits you cut out they can be re used to build back up as you can see I used a piece I cut out to block the heat vent

 

It's actually not bad once u take the mic off.

 

I actually like this, keeps the speaker where u can hear, and up out of the way. Can't find a bracket made for the xj though.

 

Looks good. I can't take out vents in Arizona lol I might die. Are u hooking up an external speaker somewhere, I don't imagine u can hear it too well mounted in the dash?

 

Mines to big to go there and I bought 2 little speakers and a Y cable! They are going in that spot and on the other side! I would have bought a regular cb speaker but I like things to be symmetrical lol!!!

Got the top piece bed linered! Going to start all the wiring soon!!! Damn school tonight though!



Attachment 131259

 

I never use those vents!! I find they dry out my eyes so I always have it on the windshield! The windshield one is still in tacked!

 

I have a tone of wiring to do I have those fans and then the cb and then I'm relocating some stitches I have all ready to here

Attachment 131260

The switches are going on the thing that says push and then the other buttons that say u.s. Reset and step are being re located to infront of the light buttons and I'm putting in a volt meter where the buttons used to be! That is for a future project, dual battery set up but I figure since I'm going to be drilling through the fire wall mind as well get it all done at once!!!! And I'm gonna get Mr. Yellaxj to make me some vinyl stickers to label the switches

 

Post pics for sure, I'm gonna plop a little speaker up there on the left of the dsh as well.

 

I'm putting them on both sides lol

 

Hence the y cable/ symetrical ...got it. Good idea!

 

This is what it's going to look like I don't know what went on with the bed liner but I'm going to try and fix it tonight I think it was just the humidity today and it's hot as hell!!

Attachment 131326



Attachment 131327



Attachment 131328

It took a couple days of trial and error to get it to sit that nicely and yeah part of my dash is on my living room floor lol!! Any ways gotta put it back together and get my *** to school! And your not seeing things that is a screw lol I just wanted to show you guys.. Going to get nuts and bolts for it tonight!

 

I'm runnin a Cobra 29LTD, a pretty big CB. So I just have it between my seat an console. I'll get a pick in the morning but it keeps it nice and snug. I run the PA and coax cable under the seat and hide them in the kick panel. Power goes to the cig lighter and hid that wire under the console so all that is seen is a plug-in. Been good to me.
Now I've got a 32in waist so it might not be as comfortable for a bigger person

 

I must say... You kind of kick ***...

 

*bows* thank you, thank you !!!

 

I haven't finished fixing the front yet but I'm gonna spend some time on it when I get home from work