Doorless XJ's
#1
Member
Thread Starter
Join Date: Apr 2012
Location: Green Bay
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Doorless XJ's
I'm looking to see what you guys that run doorless use for side mirrors. I'm going doorless next weekend for the first time and wanna be safe than sorry if ya know what I mean. Pic would be awesome
#6
Senior Member
Join Date: Jan 2012
Location: vanburen
Posts: 720
Likes: 0
Received 1 Like
on
1 Post
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
Good luck on getting them torx bolts out I broke 3 cornwell torx sockets on mine lol so I just cut the hinges and used 1/4 x 1/2 long bolts for pins it works great, and here long as I have a rear view mirror on the windshield its legal
Trending Topics
#8
CF Veteran
Join Date: Jun 2011
Location: Dayton, Ohio
Posts: 2,460
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Comanche
Engine: 4.0
1. you will never ever get your doors to seal right ever again if you do that.
2. I got mine from Pepboys it was like 5 bucks and has a bolt hole so it will mount to the stock hinges
3. I thought I'd just share that with you..
2. I got mine from Pepboys it was like 5 bucks and has a bolt hole so it will mount to the stock hinges
3. I thought I'd just share that with you..
#9
Member
Thread Starter
Join Date: Apr 2012
Location: Green Bay
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Originally Posted by Gee oh Dee
Is this on an earlier style XJ? If so the hinges should have 2 holes in the body of the hinge. I've seen guys run bolts through them to attach mirrors.
#10
Senior Member
Join Date: Jan 2012
Location: vanburen
Posts: 720
Likes: 0
Received 1 Like
on
1 Post
Year: 1995 &2000
Model: Cherokee
Engine: 4.0
Since its a 98 you can't pin them anyway Lol so carry on! but its a pain to realign them to put back on too just paint the hinges or magic marker so you can get them close when you put them back on
#12
Old School CF Moderator
Join Date: May 2010
Location: Chattanooga
Posts: 9,652
Likes: 0
Received 3 Likes
on
3 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
X2 on the seal part...If you have older style doors just cut the bottom hinge...I started out replacing the torx and it turned out to be just as hard... its a pain to unbolt em and line em up each time you take em off, just mod the hinge and youll be in better shape IMO.
#13
Member
Thread Starter
Join Date: Apr 2012
Location: Green Bay
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Originally Posted by Xj88
X2 on the seal part...If you have older style doors just cut the bottom hinge...I started out replacing the torx and it turned out to be just as hard... its a pain to unbolt em and line em up each time you take em off, just mod the hinge and youll be in better shape IMO.