the evolution of my Jeep (before and after lift pics included)
#1
Thread Starter
CF Veteran
Joined: Oct 2010
Posts: 1,756
Likes: 1
From: Salem Nh
Year: 1998
Model: Cherokee
Engine: 4.0
the evolution of my Jeep (before and after lift pics included)
the pics kinda suck ill take better ones some other day but here they are. let me know what ya think or any suggestions i should do
When i first got it>
a short time after>
before the lift>
what my jeep looks like now>
When i first got it>
a short time after>
before the lift>
what my jeep looks like now>
#3
Thread Starter
CF Veteran
Joined: Oct 2010
Posts: 1,756
Likes: 1
From: Salem Nh
Year: 1998
Model: Cherokee
Engine: 4.0
i dont really kno yet, i mean my jeep isnt for looks i actually wheel it. i was thinkin either 30s or 31s but i feel if i go with 31s my rig would basically look stock agian. idk could ifit 32s with no trimming? what size u think i should go with
#7
Thread Starter
CF Veteran
Joined: Oct 2010
Posts: 1,756
Likes: 1
From: Salem Nh
Year: 1998
Model: Cherokee
Engine: 4.0
Trending Topics
#8
It depends on how much lift you have. With 3" you can do 31x9.5 and not rub or trim at all. If you get 31x10.5 you'll rub on your LCA's at full lock and you may need to trim your front bumper caps to keep from rubbing while flexing.
32's will require some slight fender trimming with 3" of lift.
32's will require some slight fender trimming with 3" of lift.
#9
Thread Starter
CF Veteran
Joined: Oct 2010
Posts: 1,756
Likes: 1
From: Salem Nh
Year: 1998
Model: Cherokee
Engine: 4.0
It depends on how much lift you have. With 3" you can do 31x9.5 and not rub or trim at all. If you get 31x10.5 you'll rub on your LCA's at full lock and you may need to trim your front bumper caps to keep from rubbing while flexing.
32's will require some slight fender trimming with 3" of lift.
32's will require some slight fender trimming with 3" of lift.
#10
I have offset rims so I don't rub at all with 31 1050 15s. So you might want to go with the 31 950 15's Yes you can fit 1050 on a stock rim.
Last edited by OHHNOES; 11-04-2010 at 08:03 AM.
#11
Thread Starter
CF Veteran
Joined: Oct 2010
Posts: 1,756
Likes: 1
From: Salem Nh
Year: 1998
Model: Cherokee
Engine: 4.0
#12
31 10.50's on stock rims will rub the lca's at full lock. And so far as spacers go I have never trusted them. Plus for the amount of money your gonna spend on spacers you can just go buy some cheap steal rims.
#13
Thread Starter
CF Veteran
Joined: Oct 2010
Posts: 1,756
Likes: 1
From: Salem Nh
Year: 1998
Model: Cherokee
Engine: 4.0
Ha yea thats a good point, so 31/ 9.5/15s it is. And then some steelies, I like those black rock rims that guy onhere just got
#14
If your gonna get steelies then you can run 31/10.5's without them rubbing if the backspacing is 4" or less. I was just saying if you were sticking with factory rims run 31/9.5's so they dont rub.
#15
Thread Starter
CF Veteran
Joined: Oct 2010
Posts: 1,756
Likes: 1
From: Salem Nh
Year: 1998
Model: Cherokee
Engine: 4.0