hey guys yes i have used the search button i have read every post about this issue and i have tried everything known to be wrong now that i have said that on to the issue

i have a 1999 jeep cherokee and my guages arent workin and yes my airbag module has been swapped yes i have checked every fuse yes i have tried re-grounding the gauges and nothing has worked for me i need to get this fixed or i wont pass inspection in california when i move there in may so if someone has a swell idea lemme kno plz and ty

also i have went to the jy and got a cluster and tried it and nothing and yes i did check that it wrkd before i tried it


THANK YOU IN ADVANCE

 

bump NO HELP ANYONE?

 

No clue but BUMP!!!!!

 

Thx for the bump

 

I have no idea on the specifics of your issue but I would suggest finding a schematic of the cluster wiring if possible. Get a volt meter if you do not have one already and check the harness for voltage. Isolate the wires for each function, for example, the oil gauge and see if the meter indicates different voltages at different rpm, etc. Just an idea that may get you pointed in the right direction.

 

For starts have some patience the forum isn't always a crystal ball lol, second it may help to pm a mod to move this into the oem tech part of the forum.

What gauges exactly don't work? Occasionally my airbag light comes on and I lose rpm and speedo, so far a slap on the top of the dash works fine, which is telling me there's a weak connection somewhere that bumps can effect.

Does it still show mileage or does it say "no bus" you also may wanna search through threads concerning the no bus issue as well seeing as its a similar screwy issue.

 

None of the gauges wrk and ive tried the slappin that doesnt wrk and no "no bus" message

 

Just taking a stab, but the PCM maybe? Could have fried a communications circuit and it isn't sending gauge info?

 

Do u kno how i would go about testing that?

 

check the wires under the steering above of ur left knee pull the wires and connect them back

 

Wat wires there r a ton there lol

 

ok when no bus come wile driving move them with ur hand just hold them and shake them slowly

 

Ok ty i will give this a try tomorrow on my day off i will let ya kno what i figure out again ty for thr input

 

The only inspection in California is smog checks. They only care about what comes out of your tail pipe.

 

only partly true on this one. they also run a scan and check for any current DTC's and also verify you have functioning CEL. Sorry cant help with the gauges though.