flex pics
#2918
Newbie
Join Date: Jan 2011
Location: Vernon TX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
In this pic I was running some cj7 lift springs but I changed them out for a set of Toyota taco rear offset leafs to stretch the front 6" and keep axle wrap to a minimum
#2922
Junior Member
Join Date: Jan 2009
Location: Midland, MI
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
They are Mickey Thompson Classic (fake bead locks) http://www.summitracing.com/parts/mt...FexaMgodjg0A6A
I got a good deal on mine slightly used with the tires. They look nice, but I wouldn't recommend them if you do much offroading. I caught one of them on a rock and bent up the fake beadlock and broke some of the bolts off.
I got a good deal on mine slightly used with the tires. They look nice, but I wouldn't recommend them if you do much offroading. I caught one of them on a rock and bent up the fake beadlock and broke some of the bolts off.
#2923
#2924
Newbie
Join Date: Jan 2011
Location: Vernon TX
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
It really wasn't that hard the angle iron was there when I bought the jeep but it looks like its welded to some DIY bumper brackets from "Iron Rock Off Road" I'm sure other company's make these brackets too but they are the only ones I've ever noticed and the lca mount its the rear mounting point I used I couldn't be more happy with they way the front turned out I'm about to do a rear leaf flip in the back and cut the back up to the body line just below the rear glass and install a fuel cell I have a anti wrap bar installed already to keep the 5.89 gears from warping the leafs "again" and the addition of revolver shackles to give it a little more Travel down I know there's extreme build threads all over the net but if anyone would anyone would like when I get home in June and get started ill post up one of mine I hope to get close to a 112" wheel base out of it on roughly 6" of lift not including the extra hight from the axle it clears the 39.5's exceptionally well right now tho but we all know no build is ever complete