Which Gears and should I try to install them myself?
#1
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: NC
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 L
Which Gears and should I try to install them myself?
Hello I have a 98 xj D30 front 8.25 rear. I need to regear to 4.56 for my 33" tires. I have seen a lot of discussion about gears but am looking for a more definite response. I have been looking at gear packages at rustys and rc just to simplify things with install kits etc. Is this a good route? And would it be better to get all the tools to install them myself or should I pay for someone to do it? I don't have a lift or anything crazy like that but I have done all the work on my Jeep myself so far and wouldn't mind saving a few bucks I just don't want to screw something up.
Thanks for the help.
Thanks for the help.
#2
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: NC
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 L
Basically if someone posted a picture of shopping cart with everything I need (at a place with good prices and quality parts) then that would be the most helpful thing
#4
Senior Member
Join Date: Mar 2013
Location: McDonough, GA
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
#5
CF Veteran
Join Date: Nov 2011
Location: City of Trees, CA
Posts: 7,387
Likes: 0
Received 10 Likes
on
9 Posts
Year: 93 2 door
Model: Cherokee
Engine: 4.0
this topic has really been covered a lot. you need:
D30 carrier (4.56 & up)
HPD30 reverse cut ring and pinion
master install kit
8.25 ring and pinion
master install kit
definitely pay someone to do it. you cannot do this yourself
D30 carrier (4.56 & up)
HPD30 reverse cut ring and pinion
master install kit
8.25 ring and pinion
master install kit
definitely pay someone to do it. you cannot do this yourself
#6
Trending Topics
#8
Fixed it for ya....
To the OP, you'll need some special tools to do the job.
Try posting in the regional forums and see if anyone close to you is willing and able to help you out.
Most Jeep owners will gladly help for the low, low price of pizza and beer.
To the OP, you'll need some special tools to do the job.
Try posting in the regional forums and see if anyone close to you is willing and able to help you out.
Most Jeep owners will gladly help for the low, low price of pizza and beer.
#9
Newbie
Join Date: Mar 2013
Location: South Carolina
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 HO
I see your in NC, you should look into get your stuff from ECGS http://eastcoastgearsupply.com/ They are right out of Raleigh and they usually have kits with everything you need. And the shipping is practically overnight. As far as installing the gears I had my transmission guy install them for me. I was going to install myself until I found out about all the shimming and different things that had to be done
#11
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: NC
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 L
I have watched videos on installing them and obviously it isn't easy but it's not rocket science. I just think not having a lift might make it a real pita unless I took the axles out. And I could get the tools and the paint and stuff. Thanks for the parts suggestions though that helps a lot.
#13
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Which Gears and should I try to install them myself?
You'll want nice quality tools for the regear if you plan to do it yourself.
Pull the axles out, it's 1,000 times easier.
Pull the axles out, it's 1,000 times easier.
#14